Whisper Wash Freedom 16" Surface Cleaner

The Whisper Wash Freedom 16" Surface Cleaner is a low-GPM rotary surface cleaner that runs from 3.0 GPM. Its 46 Series swivel spins smooth on smaller machines where a heavier cleaner would bog down or under-rotate. Powder-coated aluminum cover, 16-inch path, made in the USA. Key Features Lowest entry flow in the Freedom line: Starts at 3.0 GPM, so it keeps spinning on smaller machines that can't drive a bigger cleaner. 46 Series high-efficiency swivel: Built for low flow and rebuilds with a quick-change cartridge. No press, no bearing job. Powder-coated aluminum body: Cover and handle are both aluminum. Light, rugged, and the cheaper sibling to the XENOY-covered 19". Flip-n-Fold aluminum handle: Folds down for transport and storage between jobs. Legacy 2-tip spray bar: Two I-MEG tips lay down overlapping jets that clean the full 16" path in one pass. No zebra striping. Hot or cold water: Runs up to 185°F. No change to your setup either way. Specifications Cover material Powder-coated aluminum (blue) Handle Powder-coated aluminum, Flip-n-Fold Cleaning width 16" Flow rate 3.0–6.0 GPM Max pressure 1,500–4,000 PSI Water temperature Hot or cold, up to 185°F Swivel 46 Series high-efficiency, quick-change cartridge Spray bar Legacy 2-tip, 1/4" I-MEG tips Country of origin USA Warranty 6 months What's Included Complete unit: aluminum cover, aluminum Flip-n-Fold handle, 46 Series swivel, Legacy 2-tip spray bar, nylon brush skirt, quick connect inlet Tips sized to your machine. Confirm your GPM and PSI before you order so the orifice matches your rig. Built for lower-GPM rigs in the 3.0–6.0 GPM, 1,500–4,000 PSI window. It's the most entry-friendly Freedom. If you're running 8 GPM or more, this one will under-cover for the flow you've got. Look at the Big Guy 28" or Maxima 36" instead. How It Works Water comes in through the quick connect to the 46 Series swivel, which spins the Legacy spray bar under the aluminum cover. Two I-MEG tips throw overlapping high-pressure jets that clean the whole 16" path in one pass, so you skip the striping you get dragging a single wand. The nylon brush skirt rides the surface, holds the bar at the right height, and keeps overspray down. One note for soft wash crews: this is a high-pressure water tool, not an SH applicator. The cover and handle are both aluminum, and SH corrodes aluminum. The powder coat is the barrier, so once it chips at the edges, that's where corrosion starts. If bleach overspray lands on it, rinse it with fresh water and keep an eye on the coat. Pairs Well With ST1500 Pressure Washer Gun Rampage Beast Pressure Washer Hose Brass Quick Connect Socket Frequently Asked Questions What size machine do I need for the Whisper Wash Freedom 16? It's built for lower-GPM rigs and runs from 3.0 GPM, the lowest entry flow in the Freedom line. The supplier rates it 3.0 to 6.0 GPM and 1,500 to 4,000 PSI. Tips get matched to your machine, so confirm your GPM and PSI before you order. Running more than 6 GPM, step up to a bigger cleaner. Can you run hot water through it? Yes. Hot or cold, up to 185°F. No change to your setup either way. Freedom 16 or Freedom 19, which one? The 16" has a powder-coated aluminum cover and runs from 3.0 GPM. It's lighter and cheaper. The 19" has a XENOY composite cover, runs from 3.5 GPM, and covers more area per pass. Smaller machine or tighter budget, go 16. More machine and bigger flatwork, go 19.