JDY Performance Equal-Length Exhaust Midpipe Kit - BMW G80/G81/G82/G83 M3/M4
JDY Performance Equal-Length Exhaust Midpipe Kit - BMW G80/G81/G82 M3/M4 Transform the sound, flow, and character of your S58-powered BMW with the JDY Equal-Length Midpipe Kit. Engineered with dual 76mm tubing, this system replaces the factory uneven exhaust routing with a smoother, equal-length layout. Both exhaust paths are repositioned toward the passenger side, reducing unnecessary bends and improving exhaust flow. An integrated 57mm X-pipe balances flow between both banks, producing a deeper, smoother, and more continuous exhaust note while helping reduce harsh rasp, uneven pulses, and low-frequency cabin drone commonly associated with straight dual-pipe systems. Key Features Dual 76mm High-Flow Design The midpipe uses two 76mm outer-diameter tubes, offering greater flow capacity than the commonly used 70mm aftermarket systems. The optimized routing minimizes sharp bends and unnecessary changes in direction, allowing exhaust gases to exit more efficiently—especially at higher engine speeds and increased power levels. Equal-Length Exhaust Routing Unlike the factory staggered layout, both exhaust paths are routed together along the passenger side with equal overall lengths. This improves exhaust-pulse consistency and helps create a cleaner, more balanced exhaust tone. Integrated 57mm X-Pipe A carefully positioned 57mm X-pipe balances pressure and flow between both exhaust banks. This helps: Produce a deeper and more continuous exhaust note Reduce rasp and uneven exhaust pulses Minimize low-frequency chassis and cabin resonance Create a smoother tone without sounding excessively sharp or metallic Balanced Performance Across the RPM Range Oversized straight-through exhaust systems can reduce backpressure excessively and negatively affect low-RPM response. The X-pipe configuration helps maintain an appropriate pressure balance, supporting responsive low- and mid-range torque while retaining excellent high-RPM exhaust flow. The result is smoother and more linear power delivery throughout the usable RPM range. Fully Argon-Purged TIG-Welded All joints are TIG-welded with full argon back-purging to create clean, consistent, and fully penetrated welds. This manufacturing process improves weld strength and gas tightness while reducing the risk of cracking or exhaust leakage under continuous vibration and repeated thermal cycling. Upgraded Reinforced Chassis Brace Due to the X-pipe configuration, the factory center chassis brace cannot be reused. The kit therefore includes a specially designed raised replacement brace that provides sufficient clearance without compromising the optimized exhaust routing. The upgraded brace: Uses the original factory mounting points Requires no drilling or chassis modification Maintains safe ground clearance Provides greater strength than the factory brace Helps reinforce lateral chassis rigidity Offers additional protection against road debris and impact damage OEM-Style Fitment The system uses factory-style mounting locations and precision-engineered connection points for accurate installation. No drilling or permanent modification to the vehicle chassis is required. Correct pipe positioning maintains suitable underbody clearance, prevents unnecessary stress on the exhaust system, and provides a secure, leak-resistant connection. High-Strength Installation Hardware The supplied fastening hardware includes 12.9-grade high-strength studs for excellent resistance to heat, vibration, thread deformation, and loosening. The hardware helps maintain reliable flange sealing over time while making future removal and maintenance easier. 3D-Printed Installation Tools Included Dedicated 3D-printed installation tools are included to help correctly position and align the exhaust system during installation. These tools simplify the installation process and help achieve accurate, consistent fitment. Vehicle Compatibility BMW G80 M3 BMW G82 M4 S58-powered models only Product Specifications SKU: S58-253-DZC-KA Main Pipe Diameter: Dual 76mm X-Pipe Diameter: 57mm Construction: Fully argon-purged TIG-welded Installation: Factory-style mounting with included 3D-printed installation tools Package Contents JDY dual 76mm equal-length midpipe assembly Integrated 57mm X-pipe Upgraded raised chassis reinforcement brace High-strength installation hardware 3D-printed installation tools