These products can be supplied at standard lengths as listed or we can cut to your desired length at a minimum charge, just fill in the Custom Cut section. If you require more than 1 cut size option please reach out as we can optimise cutting. All custom cut are done after anodising / powdercoating, therefore cut edges will be mill finish. We aim to produce your custom cut to the exact length, however there is a production tolerance of +/- 2.0mm. All are square cut unless otherwise advised. Re Custom Powdercoated, there is a lead time of approximately 15 - 20 working days. In price of 1st powdercoated item there is a 1 off powdercoat surcharge of $200.00, after that only the original item cost is added if more than 1 is selected. All custom cuts are done before powdercoating. Re Anodised products, there is a lead time of approximately 15 - 20 working days. - Due to the different depths in the anodising bath and other variables, no two items will necessarily be 100% identical, please bear this in mind if you are matching another or putting these next to or near each other, we take no responsibilities for variations in colour as it is impossible to ensure a perfect match. Approx. up to 50mm at each end may not be usable due to tong marks left from the anodising process, remember to allow for this in quantity calculations. Please note that none of these battens are structural. We will let you know when your order will be delivered or ready for pick-up from our store. All prices include GST.