Plug & Play LED 3rd Brake Light Flasher Module for Lexus | EACH
Corsomotion Custom Automotive Electronics Plug & Play LED 3rd Brake Light Flasher Module For Select 2019–2026 Lexus UX and 2022–2026 Lexus NX Models Selectable flash modes, fade effects, and adjustable operating speed Watch the Module in Action See the Corsomotion Lexus UX and Lexus NX 3rd brake light flash module in operation, including selectable flash patterns, fade effects, and adjustable operating speed. Actual flash and fade appearance may vary slightly depending on the vehicle, camera settings, and selected module adjustments. Customizable Lexus 3rd Brake Light Flasher Upgrade the factory LED 3rd brake light on select 2019–2026 Lexus UX and 2022–2026 Lexus NX models with a Corsomotion plug-and-play brake light flash module featuring selectable flash patterns, fade effects, and adjustable operating speed. This Lexus third brake light flasher connects inline between the factory vehicle wiring harness and the factory LED 3rd brake light. When used with the correct connector, no cutting, splicing, or permanent modification of the original wiring harness is required. Each module is designed, programmed, assembled, and individually tested through our Southern California operation. More Than a Basic Brake Light Flasher Many inexpensive brake light flashers are limited to one permanently programmed pattern and one fixed operating speed. The Corsomotion module was developed for drivers who want greater control over the appearance and operation of their vehicle lighting. Choose from multiple flash and fade patterns, operate the effects independently or together, and adjust the flash and fade speeds to create a setup that matches your preference. Corsomotion specializes in small-production custom automotive LED electronics, vehicle-specific wiring solutions, and firmware-controlled lighting modules. Vehicle Compatibility 2019–2026 Lexus UX 2019–2024 Lexus UX 250h 2025–2026 Lexus UX 300h 2022–2026 Lexus NX 2022–2026 Lexus NX 250, NX 350, NX 350h, and NX 450h+ Fitment Notice: Vehicle production changes may affect connector compatibility. Please confirm that your vehicle has the matching factory LED 3rd brake light connector before ordering. Product Overview This plug-and-play Lexus LED 3rd brake light module installs inline between the vehicle’s factory wiring harness and the factory LED third brake light. When the brake pedal is pressed, the module activates the selected flash, fade, or combination pattern before the third brake light remains steadily illuminated. The module is designed specifically for compatible LED 3rd brake light systems and should not be used with an incompatible connector or incandescent brake light assembly. Key Features Plug-and-Play Connection Installs between the matching factory harness and factory LED brake light connector. No Cutting or Splicing No permanent modification of the original wiring harness is required when the connectors match. 7 Selectable Flash Modes Select the flash pattern that best matches your preferred appearance. 3 Selectable Fade Modes Add a smooth fade effect to the factory Lexus LED third brake light. Independent or Combined Effects Operate in flash-only, fade-only, or combined flash-and-fade mode. Adjustable Speed Adjust flash and fade timing with the module’s built-in adjustment dials. DIP Switch Programming Change operating patterns without additional programming equipment or a mobile application. Individually Tested Each module is function-tested before shipment from Southern California. DIP Switch Mode Settings DIP Switch Function Switches 1, 2, and 3 Select one of the seven available flash modes Switches 4 and 5 Select one of the three available fade modes Switch 6 Activates 10 flashes followed by steady illumination Watch the demonstration video above to compare the available flash and fade patterns. Adjustable Flash and Fade Speed Unlike a basic fixed-speed brake light flasher, this Corsomotion module allows the flash and fade timing to be adjusted. Use the included small flat-head screwdriver to gently turn the adjustment dials until the desired operating speed is reached. Do not apply excessive force to the adjustment dials. Installation Access the factory LED 3rd brake light connector. Disconnect the factory connector. Connect the Corsomotion module inline between the factory vehicle harness and LED brake light. Select the desired DIP switch mode. Adjust the flash and fade speed as needed. Test all brake light functions before reinstalling the vehicle trim. Installation difficulty and trim removal procedures vary by vehicle. Professional installation is recommended when the installer is unfamiliar with automotive trim panels or vehicle electrical systems. What’s Included 1 Corsomotion plug-and-play LED 3rd brake light flash control module 1 small flat-head adjustment screwdriver Designed for Customization. Built in Small Production Runs. Corsomotion develops custom automotive LED products in small production runs rather than mass-producing generic fixed-function modules. Product design, firmware development, assembly, and final function testing are handled through our Southern California operation. The result is a customizable Lexus brake light flash module developed for customers who want more control than a standard low-cost flasher can provide. Important Information Designed for compatible factory LED 3rd brake light applications only. Do not use with an incompatible connector, lighting system, or incandescent brake light assembly. Verify connector compatibility before ordering. Disconnect the vehicle battery when required by the vehicle service procedure. Test all brake light functions before reinstalling vehicle trim. Professional installation is recommended. Check applicable federal, state, and local vehicle-lighting regulations before use. Installed, modified, miswired, damaged, or used electrical products may not qualify for return. Aftermarket Product Disclaimer This product is an aftermarket custom automotive lighting accessory and is not manufactured, endorsed, sponsored, or approved by Lexus or Toyota Motor Corporation. Lexus, UX, UX 250h, UX 300h, NX, NX 250, NX 350, NX 350h, and NX 450h+ names are used solely to identify compatible vehicle applications. Questions or Fitment Assistance Contact Corsomotion before ordering when assistance is needed with Lexus UX or Lexus NX fitment, connector compatibility, installation, or module settings. Sending a clear photo of the vehicle’s factory 3rd brake light connector can help us confirm compatibility.
Lexus UX 19~26, Lexus NX 22~26, Module ONLY (self wiring needed)