LSD Mono Full OP Version 1/24 Rear-Wheel RC Drift Car Chassis

The LSD Mono comes with all of the OP parts except the screws and bearings. If you need the full OP version, this one is best choice. Features: 1.In terms of structural design, Mono features a simplified steering system with a direct-drive setup. By adjusting the servo mount’s height, angle, and front-to-back position, users can fine-tune steering characteristics and flexibly adjust the front weight distribution to suit different tuning needs. 2.The suspension system of Mono is compatible with traditional upright shock absorbers, and it also supports the optional horizontal (lay-down) shock setup, a signature of LSD. After multiple generations of refinement, the horizontal suspension has significantly improved in sensitivity and response, providing more direct feedback for precise control. 3.In terms of size and compatibility, Mono offers a wider adjustment range. The wheelbase is adjustable from 90 mm to 114 mm, while the track width ranges from about 67 mm (with 0.5° narrow wheels) to 94 mm (with 3.5° wide wheels). It also supports optional upgrades such as a magnetic body mount system and the Mini-Z front clip (L-lock) mounting structure, further enhancing compatibility and versatility. 4.In terms of detail design, Mono continues the simulated brake setup from the LSD Plaid. By repositioning the front brake calipers further back, it achieves a more realistic, true-to-life look. The front knuckle structure has also been optimized, so the calipers no longer need to be paired with the steering cups. This improves overall precision while maintaining a consistent scale appearance. 5.In terms of electronic component layout, Mono offers a wider range of installation options, allowing for greater flexibility and ease in the overall vehicle arrangement. The newly added high-mounted equipment rack (OP) can also be utilized to adjust the vehicle's center of gravity, thereby opening up additional possibilities for tuning. Specification: Name:LSD Mono LSDM 1/28 1/24 Chassis Wheelbase:90mm-114mm Track width:67 mm (0.5° offset) – 94 mm (3.5° offset) Color:Khaki green with titanium accents,Black with silver accents Steering System:Direct-drive steering layout Adjustable servo mount:Height,Tilt angle,Front/rear position Supports optional OP horizontal shock system Package Includes: 1x LSD Mono LSDM 1/28 1/24 Rear-Wheel RC Drift Car Chassis Kit (Green) 1x Rear Laydown Shock Set （Black） LSDM-OP-01B 1x Metal Rear Diffuser LSDM-OP-02 1x Magnetic Body Mount Set （Titanium Grey） LSDM-OP-03T 1x High-mount electronics mount（OD Green） LSDM-OP-04G 1x Front Laydown Shock Set（Silver） LSDM-OP-05S 1x Brake Disc & Caliper Set（Titanium Grey） LSDM-OP-06G 1x Servo Upper Cover （Silver） LSDM-OP-07S 1x Front Bulkhead Cover （Translucent Green） LSDM-OP-08G 1x Kyosho Mini-Z Body Mount Kit （OD Green） LSDM-OP-09G 1x Servo Mount（Green/Grey） LSDM-OP-10G 1x Ball Differential Set LSDM-OP-11 1x Motor Mount with Small Wire Organizer（OD Green） LSDM-OP-12G 1x Metal Chassis Plate LSDM-OP-13 1x Wheelbase Adjustment Plate（OD Green） LSDM-OP-14G 1x Battery Retention Clip Set（Black） LSDM-OP-15B 1x Wire Organizer（OD Green） LSDM-OP-16G 1x Titanium Turnbuckle Set 4Pairs LSDM-OP-18 1x Titanium Sleeve-Type Turnbuckle 1Pair LSDM-OP-19 1x Titanium Ball Studs 32PCS LSDM-OP-20 1x High-Precision Bearings LSDM-OP-21 1x Rear Shock Spring Set 3Paris LSDM-OP-22 1x Shock Set 1Pair LS-SH-03 1x Dual-Rate Springs LS-SP-03 1x Servo Bottom Cover （For AFRC or AGFRC） LS-SVO-OP Recommend Coponents: AFRC D2114TG-S 11g All-Metal Servo (optional) ARKEDGE RC AG-4 GEN2 Bluetooth Drift Gyro (optional) ROCKET-RC 1525 Sensored Brushless Motor and 30A ESC Combo (optional) MABILIS AeroDisc Wheel Rims 20mm for RC Drift Car (optional) Note: Electronic components , car shell, Radio and receiver, batteries and are not included.