Bi-LED Projector Headlight Kit for Toyota LandCruiser 70 Series Facelift (09/2023+) | DIY Plug & Play Retrofit

Weak factory beam on unlit tracks. A front end that looks like every other facelift 70 on the road. This kit fixes both. True Bi-LED projector performance, RGB Angry Eye shrouds, RGB Demon Eye projectors — all app controlled. The kind of front end that gets noticed at every servo, campsite and trailhead. How this kit works This is a projector retrofit kit — you assemble the Bi-LED projectors, RGB shrouds and Demon Eye modules into the headlight housings, then install onto your facelift 70 Series like factory headlights. No electrical knowledge required, no custom fabrication. All components are pre-matched. Most customers complete the full setup in under 1 hour. Step-by-step guide included — and you can message us if you need us. What you get Bi-LED projector — up to 3× brighter than the factory unitTrue projector optics control the beam properly — clearer shape, improved forward visibility, wider road coverage, better high beam distance. The driving beam always remains white regardless of RGB settings. RGB Angry Eye — shroud accent lightingThe Angry Eye shroud wraps around the projector with RGB accent lighting. App controlled — any colour, any mode, or set to white for a clean DRL look. RGB Demon Eye — projector centre lightingThe Demon Eye sits inside the projector lens, creating a glowing centre effect. App controlled independently or in sync with the Angry Eye. Sets any colour — or off entirely. App controlled — iPhone and AndroidControl both RGB systems from your phone. Choose colours, switch modes, run them together or separately. Simple connection process, quick setup. Plug & play — once assembledOnce the kit is assembled, it installs exactly like factory headlights — bolts into original mounting points, plugs into the facelift model's factory connector, no coding required. Built for Australian touring conditionsSealed once assembled, UV-resistant lenses, vibration-resistant construction. Designed for real 70 Series use — touring, off-road and daily driving. Important note on RGB lighting The RGB Angry Eye and Demon Eye are for styling purposes only. The main driving beam always remains white and is not affected by RGB settings. RGB lighting is for off-road and styling use. Confirmed fitment FITS — FACELIFT 70 SERIES 09/2023 ONWARDS ✔ LandCruiser 76 Series Wagon (09/2023+) ✔ LandCruiser 78 Series Troopy (09/2023+) ✔ LandCruiser 79 Series Single Cab (09/2023+) ✔ LandCruiser 79 Series Dual Cab (09/2023+) Fits the redesigned facelift headlight housing and factory mounting points. Not universal. Does not fit the pre-facelift model (2007–09/2023) — see our separate pre-facelift listing for that shape. Complete kit — everything included, nothing extra needed ✔ 2× facelift-shape headlight housings ✔ 2× Bi-LED projector units ✔ 2× RGB Angry Eye shrouds ✔ 2× RGB Demon Eye modules ✔ Mounting hardware ✔ Plug & play loom (facelift connector) ✔ Step-by-step assembly & install guide Choose your housing finish at checkout — Standard Chrome or Gloss Black. Same kit, same performance, different look. Setup process — under 1 hour 1 Position the Bi-LED projectors into the headlight housings. 2 Attach the RGB Angry Eye shrouds and Demon Eye modules. 3 Connect the supplied plugs and seal the lens. 4 Install headlights onto vehicle — bolts into factory mounts, plugs into the facelift connector. 5 Connect app, set your colours. Drive. Full guide included — message us if you get stuck at any step. Road use note These headlights are pending engineering certification for on-road use in Australia and are sold for off-road use. RGB styling lighting is for off-road use only. Modification laws vary by state — check your local requirements before fitting to a registered vehicle. Message us before ordering if you have questions. Common questions How do I know if I have the facelift model? If your 70 Series was built from September 2023 onwards it's the facelift shape, with a redesigned front end and headlight housing. Message us your build date or VIN if you're not sure before ordering. Is this hard to assemble? No electrical knowledge required and no custom fabrication. All components are pre-matched for this kit. The step-by-step guide walks through every stage. Most customers complete it in under an hour. Message us if you get stuck. What housing colours are available? Standard Chrome or Gloss Black. Same performance either way — just pick the finish that matches your build. Selected at checkout. Does the RGB affect the driving beam? No — the driving beam always remains white. The RGB Angry Eye and Demon Eye are styling lighting only and operate independently from the main beam. Will these fit the pre-facelift 70 Series? No — this kit is shaped for the facelift model (09/2023 onwards) only. For the earlier 2007–09/2023 shape, see our separate pre-facelift headlight listing. What's your returns policy? 30-day change-of-mind returns from dispatch date on unused, unopened items — store credit issued. Faulty item? We cover return shipping and replace under the 12-month warranty. Full policy here. You're covered ✔ 12-month warranty from dispatch date ✔ 30-day returns from dispatch date ✔ Protected under Australian Consumer Law ✔ NSW-based Aussie business — real support The most aggressive headlight upgrade available for the facelift 70 Series. Pre-order now — ships September–October 2026.