Touareg (2013+) Adblue & SCR Delete MAX PERFORMANCE Kit - (tuning required, not included)

Here are your required Tuning options Increase the performance, reliability and fuel economy of your 2013+ VW Touareg TDI We have combined the DPF delete midpipe and primary cat delete downpipe AND the Catback into a FULL TURBO-BACK KIT to save you money! This package includes all the hardware you will need for a complete DPF & Adblue delete. This kit is 100% bolt-on. No cutting or welding required. These parts will bolt up between your factory turbo and replace your entire exhaust line. This kit is built to last with high quality 304 Stainless Steel. All of the hardware needed for installation is included. Installation time Installation time will vary greatly based on experience, know-how and having the right tools and lift, so please take the following prediction with a grain of salt. This is simply a general idea of how long it could take in an ideal situation: Around 5-6 hours. What's in the box Touareg, Q7 & Cayenne TDI (2009-2016) DPF, Adblue & SCR Delete Midpipe Cat Delete Downpipe for 2013-2016 3.0L TDI Touareg, Q7 and Cayenne Touareg 2013+ Catback Exhaust 2.5" Exhaust Strap Clamp (2) 3" Exhaust Strap Clamp (4) Exhaust gasket Stainless Steel Nuts and Bolts Features: Made from 304 Stainless Steel 3" OD 16 gauge tubing 100% bolt-on Fitment: Will fit the following North American spec vehicles with DPF (diesel particulate filter): VW Touareg TDI V6 3.0L (2013+) Related Video: Installation tips ***IMPORTANT NOTE: There are no longer any sensor fittings included in the exhaust kit, they are completely removed with the tune*** -Support the transmission and remove the transmission crossmember to remove the original exhaust without cutting it. -Access to one of the bolts on the downpipe flange is quite difficult. We’ve found that a combination of long wobble extensions will allow access to the offending nut through the wheel well. -There will be 2 rubber hoses left hanging after the DPF is removed. These, along with all unused sensor connectors can simply be tied up, out of the way. -We typically pack unused electrical connectors with grease to avoid corrosion in the event that you ever return the vehicle to stock. Usual install time is less than 2 hours.