Powerlink mk.2 compatible cable on 100m reel, NO PLUGS

Our high quality Powerlink mk 2 compatible cable allows you to connect Beolab active loudspeakers (all models, either with or without displays) to your Bang and Olufsen hifi system or television. This cable has the traditional 8 pin DIN Powerlink compatible plugs fitted and will fit almost all B&O audio systems and TV's manufactured since 1990 (any with 8 pin Powerlink output sockets) - if you are in any doubt, please ask! Available in black, sold on a 100m roll for installation, without plugs. Wiring diagram included. Please note that you will need to be able to solder in order to install this cable. Compatibility - This cable is suitable for most of the range of Bang and Olufsen Beolab active loudspeakers and most past models, including: Beolab 1 Beolab 2 Subwoofer Beolab 3 Beolab 4 Beolab 5 Beolab 7.1 Centre Speaker Beolab 7.2 Centre Speaker Beolab 7.4 Centre Speaker Beolab 7.6 Centre Speaker Beolab 9 Beolab 10 Centre Speaker Beolab 11 Subwoofer Beolab 2500 Beolab 3000 Beolab 4000 Beolab 4500 Beolab 5000 Beolab 6000 Beolab 6002 Beolab 8000 Beolab 8002 Beolab Penta mk.2 and mk.3 This cable is perfect for use with older Beolab speakers that have displays (such as Beolab 3000, 4500, 5000 and Penta) as well as Beolab 5. We also sell these cables with fitted plugs in lengths up to 20 metres. For Beolab speakers without a built-in display perhaps our Powerlink mk 3 compatible cable would suit you better. Mk 3 is lower cost, slimmer, lighter and low profile - allowing for much easier cable management! Cable specifications: Screened High-Purity Copper cable, available with Black sheath Audio and Signal conductors: 7 x 0.1mm stranded copper Audio Screening conductors: 42 x 0.1mm stranded copper Data Screening conductor: 25 x 0.1mm stranded copper Overall Cable Diameter: 4.5mm "Data", "Speaker On" and "Voltage Reference" signal wires connected for use with all Beolab loudspeakers