Voopoo Drag 6 Starter Kit 220W 5mL [CRC]

Voopoo Drag 6 Starter Kit 220W 5mL [CRC] The Voopoo Drag 6 is a 220W built-in-battery box mod powered by dual internal 2200 mAh cells (4400 mAh total) and driven by the all-new GENE.TT 3.0 chipset for faster, more stable output. The Starter Kit pairs it with the UFORCE-X Tank II (5mL, 29.1mm, 810 wide-bore) on the PnP X coil platform — ready for rich DTL clouds straight out of the box. Max Wattage: 220W Battery: Built-in 4400 mAh (2x 2200 mAh) Included Tank: Voopoo UFORCE-X Tank II — 29.1mm, 5mL (TPD 2mL), top-fill with CRC closure, PnP X coils Connection: 510 thread (raised centre plate; UFORCE-X Tank II sits flush) Display: 1.66" TFT multi-colour screen Modes: Power (5–220W), RBA, Smart, TC (SS316 / SS430 / Ni200 / Ti) Key Features GENE.TT 3.0 chipset with 0.001s rapid firing Built-in 4400 mAh battery (dual 2200 mAh) — no external 18650s needed 1.66-inch TFT multi-colour display with adjustable themes Type-C 3A fast charging (~80 min full charge) Capacitive touch lock / unlock firing Power (5–220W), RBA, Smart & TC modes (SS316 / SS430 / Ni200 / Ti) 510 connection plate for cross-brand tank compatibility Specifications Dimensions: 96.5 × 51.5 × 28.5 mm (mod) Battery: Built-in 4400 mAh (2x 2200 mAh) Output Power: 5W–220W Output Voltage: Max 8.4V Resistance Range: 0.05 Ω – 3.0 Ω Charging: Type-C, 5V/3A Chipset: GENE.TT 3.0 Coils & Tank — What Fits the Drag 6 The Drag 6 Starter Kit ships with the UFORCE-X Tank II, which runs the entire PnP X coil range. The Drag 6 mod also uses a standard 510 connection, so virtually any sub-ohm tank will thread on — the raised centre plate seats tanks up to ~29mm cleanly, and wider tanks overhang cosmetically only. Below is the full PnP X coil range so you can dial in your draw. PnP X Coil Range (for the included UFORCE-X Tank II) PnP X Coil Wattage Range Best For PnP X 0.15 Ω 60–80 W DTL clouds PnP X 0.2 Ω 40–60 W DTL PnP X 0.3 Ω 32–40 W DTL / RDL PnP X 0.45 Ω 25–32 W RDL PnP X 0.6 Ω 18–23 W MTL / RDL PnP X 0.8 Ω 12–16 W MTL PnP X 1.0 Ω 10–13 W Tight MTL The DRAG 6 and UFORCE-X Tank II use the PnP X coil platform — not the older PnP (M/R/C) coils. Make sure any replacement coils you buy are PnP X series. CRC tanks are sold in compliance with Health Canada’s VPLPR. Pro Tip — Match the Coil to the Draw: Use the 0.15Ω / 0.2Ω coils for warm, airy DTL clouds at 40–80W, the 0.3Ω / 0.45Ω for a restricted-lung middle ground, and the 0.6Ω / 0.8Ω / 1.0Ω for a tight MTL draw with nic salts. One PnP X coil lasts up to ~100mL of e-liquid. Package Contents 1x Voopoo Drag 6 Mod 1x Voopoo UFORCE-X Tank II (5mL) 1x Bubble Glass + Straight Glass tube 2x PnP X Mesh Coils (0.15Ω + 0.2Ω) 1x Type-C Charging Cable 1x User Manual & Warranty Card You May Also Like Other High-Wattage Mod Kits Voopoo Drag X3 80W Mod Pod Kit Geekvape Aegis Touch T200 200W Starter Kit (Milkman) Geekvape Aegis Legend 3 200W Starter Kit Tanks & Coils Browse all Mods & Tanks Sold in compliance with Health Canada regulations and the Vaping Products Labelling and Packaging Regulations (VPLPR). CRC (Child-Resistant Closure) packaging. Must be 19+ to purchase.