Fence Kit 2CXO2 (8 x 300 Strong)

As an option in this fence kit you can choose fence mesh formulated with Bitterfence® anti chew additive, please visit this page for more information: Bitterfence® Anti-Chew Poly Fence Mesh (critterfence.com) Bitterfence® combines the properties of traditional poly deer fence with additives as a chew deterrent. These additives are captured in the polymer itself to protect the article itself from chewing.Two Way No-Climb fence kit notes: These fence kits are engineered to BOTH exclude AND contain animals that climb. A great example of a perfect application is for cat or dog containment. These kits contain adjustable solid steel extenders that slide over and mount on the top of support posts create a canopy that animals aren't able to climb over on BOTH SIDES OF THE FENCE. The height of the fence kit includes the post extender. For example, an 8ft fence kit has 7 foot finished height above ground posts - the post extender raises the overall height to 8 feet above ground. The highest point is the top of the post extender. These kits have at least two layers of fencing that need to be spliced together with included fence ties or (suggested) a hogringer hand tool with hogrings (available separately). 28 black steel 1 5/8 7ft finished height fence posts 56 black powder coated solid steel no-climb post extenders 28 caps for posts (installed on posts already) 28 no-dig ground sleeves for posts 28 locking set screws installed in sleeves (makes posts removable or permanent - patent pending) 1 8ft x 330ft roll of Critterfence 700 GRB black poly fence mesh1 4ft x 330ft roll of Critterfence 700 GRB black poly fence mesh 3 3ft x 100ft rolls of Critterfence Steel Grid black PVC coated steel chew barrier 1 large driving anvil for post sleeves per order (if multiple kits ordered, only one anvil is shipped) 15 10 inch 120lb breaking strength black fence ties 100pk 5 12 inch kinked galvanized ground stakes 30pk 4 white warning banners 14pk fence instructions Bottom Wire Choices: This bottom wire fencing is engineered to exclude animals with sharp teeth or small animals that could otherwise gain access. Here's what's suggested: 3ft Critterfence Steel Web 1" opening size, used to exclude most small animals like rabbits, groundhogs/woodchucks, dogs/cats or to exclude coyotes 4ft Critterfence Steel Web 1" opening size, same as above but added additional width. This is typically used by customers that want to increase the amount of overlap on the ground from the standard 6" or wish to bury part of the fencing 3 and 4ft tall 1/2" Opening Steel Grid: Used for the same applications above only this mesh has a smaller opening size. This metal bottom wire fencing is used to exclude even the smallest animals like moles/voles and snakes. It's roughly twice as heavy and strong as our Steel Web fencing. Notes: Posts are round galvanized inside and out then black powder coated - no-dig sleeves are heavily galvanized inside and out for extreme long life - ground sleeves go into the ground 30", the finished height of the fence posts is the height above ground (for example, 8ft finished height is 8 feet above the ground once the sleeve is in the ground and the post has been installed into the sleeve). All posts with ground sleeves can be installed permanently or made removable. No dig ground sleeves get driven into the ground with a sledge hammer (available here on our website if needed: sledge hammer), posts then slide inside the sleeve and lock in with a locking set screw (patent pending). To remove posts for seasonal protection or to move your fence: 1) cut fence ties holding fence to posts 2) roll up fencing 3) slide post up out of sleeve. To make posts permanent, tighten the locking set screw in each sleeve to prevent the post from spinning or coming up out of the post. For rocky or heavily compacted ground, we suggest using a san angelo digging bar to pilot the hole for sleeves (instructions with kit). They are available here on o…