91-96 IMPALA REAR END & CURRIE 11" DISC BRAKES,LINES,CABLES

Brand New Currie Enterprises Rear End with 31 Spline Axles with Currie Disc Brake Kit, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMB9196X-K2). Currie Crate Rear Ends are designed to be a bolt-in upgrade. Fits: Chevrolet: 1991-1996 Caprice 1994-1996 Impala SS Includes: Currie 9-Inch Notchback Rear End with 31 Spline Axles (Currie #CE-GMB9196X) Currie Centurion High-Strength 9-Inch Notchback Housing with Flush Drain Plug Currie Performance 1541 alloy 31-spline axles Built to the stock overall width (61.9") and pinion offset specs 61.9" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on Suspension Brackets Installed in the Factory Locations These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios here. Axles include: Stock 5 x 5" wheel bolt pattern 12mm Wheel studs installed 1/4" thick heavy duty plates, gold zinc plated Tapered Timken style wheel bearings pressed on The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino" Currie 11" Disc Brake Kit (Currie Part #CE-6012E6): Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. These Brake kits require at least 15" diameter wheels Brake Kit includes: 0.50" Thick x 11.00" O.D. Solid Rotors with Hats Featuring both 5 x 4 1/2" and 5 x 4 3/4" bolt patterns Single Piston Brake Calipers with Pads Backing Plate / Caliper Mounting Bracket Plates with Drum-Style Parking Brake Assemblies installed Necessary bolts, nuts, and registers to install the braking system on both rear wheels Parking Brake Cable Kit: Connects to the Currie Parking Brake Assemblies, then comes together to join the stock cable behind the transmission Flexline Kit: Steel braided brake lines, banjo fittings & bolts, and chassis fittings to connect the calipers to the hard lines Also includes weld-on line tabs to install on your rear end Hard Line Kit: Steel hard brake line tubing to connect the chassis fittings to the included rubber hose Rubber hose connects those hard lines to the line on the frame Note: Tubing bending is generally necessary for the installation of these lines