Jewelry Saw Kit with Mini Bench Vise and Diamond Files

Product Overview This jewelry saw kit brings workpiece holding, fine cutting and edge finishing together in one manual bench setup. A U-shaped jeweler’s saw frame, mini bench vise, 12 replacement saw blades and five diamond files help you move from a marked cutting line to a neatly refined component. Secure a suitable small workpiece, guide the saw along your design, then choose a file profile to work on straight edges, curves or openings. The set suits jewelry workshops, hobby benches and detailed DIY metalworking without an electrical connection. Key Features Jeweler’s Saw Frame for Controlled Cutting The open U-shaped frame provides working clearance around small components. Its blade mounting mechanism holds a replaceable blade for controlled manual sawing on suitable jewelry materials. Mini Bench Vise for Small Workpieces Adjustable jaws and screw-operated clamping hold suitable small components during sawing, filing and detailed bench work. The compact metal vise attaches to a suitable workbench with its mounting screw. Replaceable Blades for Fine Sawing Included replacement blades support intricate jewelry cutting tasks. Correct blade selection, tension and technique remain essential for a controlled cut. Diamond Files for Edges and Contours Red-handled diamond files offer different working profiles for refining cut edges, adjusting small openings and finishing grooves or curved surfaces. Flat for flat surfaces and straight edges Half-round for curved surfaces and internal contours Triangular for corners and narrow grooves Square for square openings and corners Round for holes and rounded contours Suitable Applications Fine jewelry sawing and small metal cutting tasks Holding suitable small components during bench work Shaping jewelry components and smoothing cut edges Refining small grooves, corners and openings DIY jewelry making, detailed crafts and small metalworking projects Important Function Clarification This is a manual jewelry saw and filing kit, not a powered cutting or grinding system. Diamond files are intended for controlled shaping and surface finishing rather than heavy material removal. Use the mini vise only for suitable small workpieces and avoid excessive clamping pressure on soft or delicate components. Cutting results depend on the workpiece material, blade condition, tension and technique. Check blade compatibility and secure the blade properly before use. Replace worn or damaged blades as needed. Technical Specifications Product Type Jewelry saw and filing tool kit Mini Bench Vise Dimensions 98 × 90 × 40 mm / 3.86 × 3.54 × 1.57 in Saw Blade Length 130 mm / 5.12 in each Saw Blade Specification 3/0 Diamond File Dimensions 3 × 140 mm / 0.12 × 5.51 in each Diamond File Shapes Flat, half-round, triangular, square and round Saw Blade Quantity 12 pieces Diamond File Quantity 5 pieces Total Weight 463 g / 1.02 lb Operation Manual, no electricity required Dimensions are based on manual measurements and may vary slightly. Specifications are subject to the actual product. Package Contents 1 × U-shaped jeweler’s saw frame 1 × Mini bench vise 12 × 3/0 saw blades 5 × Diamond files in different shapes Package contents are limited to the tools listed above. Workpieces and other workshop props are not included. Basic Operating Steps Attach the mini bench vise to a suitable workbench and tighten the mounting screw. Position the workpiece between the jaws and secure it without excessive pressure. Install a compatible 3/0 saw blade and check that it is properly secured and tensioned. Mark the cutting line and guide the saw through the material with controlled movements. Select a diamond file suited to the edge, groove or contour. Carefully refine cut edges and inspect the finished workpiece. Safety Information Wear appropriate eye protection when sawing and filing metal. Secure the workpiece and keep fingers clear of the blade and vise jaws. Avoid excessive force when using the saw or diamond files. Replace worn or damaged blades before use. Keep sharp tools and small accessories away from children. Frequently Asked Questions What comes with the jewelry saw kit? One U-shaped saw frame, one mini bench vise, 12 fine 3/0 saw blades and five diamond files in different profiles. Which diamond file profile should I choose? Use flat for straight edges, half-round for curves, triangular for narrow grooves, square for square openings and round for holes or rounded contours. Can the vise attach to a workbench? Yes. Its screw-operated mounting mechanism attaches to a suitable workbench. Are the saw blades replaceable? Yes. The frame accepts replaceable blades. Check compatibility before installation; 12 fine 3/0 blades are included. Does the kit require electricity? No. All tools are manually operated, so no voltage or plug selection is needed. Support For product questions, technical assistance or order support, contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.