Kick Vent Delete Plate - F100 - Black

Kick Vent Delete Block-Off Plate for the F100! This Block Off Plate will fit the 1967-1972 F100 (possibly other years and models too) and it is designed to cover the hole in the foot well kick vent on the passenger side of the truck where the factory fresh air vent was placed. The Plate is made from 6061 Aluminum and is powder coated black for a stealth, long lasting look. The kit also includes the hardware needed to secure the Plate to the kick panel, and a gasket to help keep noise and debris from entering into the passenger compartment. Installation Instructions: First remove the adhesive backing and route the foam insulation along the edge of the plate. Next, with the plastic factory air box removed from the vehicle, position this block-off plate against the kick panel and align the holes in the plate with the holes in the kick panel. Lastly, install each of the sheet metal screws to secure the plate to the kick panel, and you're done. What you get: One powder coated 6061 aluminum plate, three bolts and three nuts to secure the plate, and a adhesive-backed gasket that you will apply before installation into your vehicle. You also get a plug for the hole where the heater bypass cable was routed through the firewall.