Starlink Standard Pivot Mount | 04759105_UK

Roof mounting gives a Starlink antenna the widest possible view of the sky, and the pivot mount makes that straightforward on a pitched roof. Designed for ease of use and flexibility, its swivelling mechanism allows fine-tuning to the angle and direction that gives the best performance, so the antenna can be set as close to vertical as possible, which is what Starlink advises.Everything needed for the install is in the box apart from the tools, and the Starlink app handles the rest: check for obstructions from the chosen spot before drilling, then align the antenna once it is mounted. Not recommended for tile, slate or clay roofs.What stands out90-degree pivotThe mast swivels so the antenna stands vertical on roof pitches up to 90 degrees, then locks in place.Made for shingled roofsLag screws and supplied sealant tape squares and strips fix and seal the base to a slanted roof. Not for tile, slate or clay.Weather-resistantDurable construction gives a sturdy, enduring foundation for the antenna in all conditions.Tidy cabling20 cable routing clips are included; fit near the roof edge for the shortest cable route.CompatibilityStarlink Standard 4, Standard 4X and Starlink Enterprise antennas.Key features Mount type: Pivoting roof mount for slanted, shingled roofs Pivot: 90 degrees Height: 235mm Base: 223 x 140mm Compatibility: Starlink Standard 4, Standard 4X, Enterprise Tools needed: Drill, 6mm drill bit, 9/16-inch hex socket, marker and level In the box: Pivot mount, 2 x sealant tape squares, 2 x sealant tape strips, 2 x lag screws, 20 x cable routing clips Package: 280 x 470 x 105mm, 1.9kg