SINET™ Locking E-Brake Levers

Overview The E-BikeKit SINET™ Locking E-Brake Levers are long-pull mechanical brake levers designed for current E-BikeKit SINET™ electric bike and trike conversion systems. Each lever combines normal mechanical braking with an electrical motor cutoff and an integrated parking-lock mechanism. Available as Left, Right, or Pair Long-pull mechanical brake-lever design Integrated parking lock Integrated motor-cutoff switch 56 cm electrical cable on each lever Matched SINET™ electrical connector Important Compatibility Notice: These e-brake levers are designed exclusively for current SINET™ systems. They are not compatible with previous-generation E-BikeKit brake-lever wiring, Legacy wiring harnesses, Rescue Pack systems, or third-party electrical systems. Description SINET™ locking e-brake levers perform three functions in one component: mechanical brake operation, motor cutoff, and parking-brake lock. When either brake lever is pulled, the integrated electrical switch sends a cutoff signal through the SINET™ wiring system to stop motor power while braking. The locking mechanism allows the brake lever to be held in the applied position while parked. This is particularly useful on adult trikes and recumbent trikes, where a parking brake helps prevent the trike from rolling. Choose a Left Lever, Right Lever, or Pair (Left & Right) depending on what you need to replace or install. Available Options Pair (Left & Right) One left-side SINET™ locking e-brake lever One right-side SINET™ locking e-brake lever Parking lock and motor cutoff on both levers 56 cm electrical cable on each lever Left Lever One left-side long-pull mechanical e-brake lever Integrated parking lock Integrated motor cutoff 56 cm electrical cable Right Lever One right-side long-pull mechanical e-brake lever Integrated parking lock Integrated motor cutoff 56 cm electrical cable Brake & Safety Functions Mechanical Braking: Long-pull lever geometry for compatible mechanical cable-operated brake systems Motor Cutoff: Sends a cutoff signal to the SINET™ controller when the brake lever is pulled Parking Lock: Holds the brake lever in the applied position to help keep a bike or trike stationary while parked Important: The parking lock is a parking aid. It does not replace proper parking practices, wheel chocks where appropriate, or regular brake inspection and adjustment. SINET™ System Compatibility Compatible With: Current E-BikeKit SINET™ conversion systems Current SINET™ integrated controllers Current SINET™ external controllers Current SINET™ main wiring harnesses Compatible mechanical cable-operated brake systems Not Compatible With: Legacy E-BikeKit or E-TrikeKit brake-lever wiring Legacy E-BikeKit wiring harnesses Legacy Rescue Pack electrical systems Third-party controllers or wiring systems Hydraulic brake systems Short-pull brake applications unless confirmed compatible These are long-pull mechanical brake levers. Confirm that your brake system requires long-pull lever geometry before ordering. Specifications Brand: E-BikeKit Platform: SINET™ Brake Type: Mechanical cable-operated Lever Pull: Long pull Parking Lock: Included Motor Cutoff: Included Cable Length: 56 cm per lever Side Options: Left, Right, or Pair Electrical Connection: Matched SINET™ connector What’s Included Pair (Left & Right): One left SINET™ locking e-brake lever One right SINET™ locking e-brake lever Pre-installed 56 cm cutoff cable and connector on each lever Left Lever: One left SINET™ locking e-brake lever Pre-installed 56 cm cutoff cable and SINET™ connector Right Lever: One right SINET™ locking e-brake lever Pre-installed 56 cm cutoff cable and SINET™ connector Installation Notes Confirm the brake system uses mechanical cables and long-pull lever geometry Install the correct lever on the left or right side of the handlebar Connect the cutoff cable only to the matching SINET™ wiring harness Adjust cable tension and brake operation before riding Test motor cutoff operation after installation Test the parking-lock function before riding Proper brake adjustment, cable routing, lever position, and motor-cutoff testing are essential for safe operation. Support Not sure whether these levers are compatible with your brake system or E-BikeKit electronics? Contact us before ordering and we'll help identify the correct component. Questions? Call us toll-free at 1-866-882-3245, Monday–Friday, 9am–5pm ET, or email support@ebikekit.com.