Grove - Base Shield V2.0

Description: Arduino Uno is the most popular Arduino board so far, however, it is sometimes frustrating when your project requires a lot of sensors or LEDs, and your jumper wires are in a mess. Base Shield provides a simple way to connect with Arduino boards and helps you get rid of breadboard and jumper wires. With the 16 on-board Grove Connectors, you can easily connect with over 300 Grove modules! The pinout of Base Shield V2 is the same as Arduino Uno R3. There are 16 on-board Grove connectors, including 4 x Analog, 7 x Digital, 1 x UART, and 4 x I2C. Apart from the rich Grove connectors, on the board you can also see an RST button, a green LED indicating power status, an ICSP pin, a toggle switch, and four rows of pinouts. Features: Power Compatible: Every Grove connector has four wires, one of which is the VCC. However, not every microcontroller main board needs a supply voltage of 5V, some boards only need 3.3V. That's why we add a power toggle switch to Base Shield V2 so that you can select the suitable voltage of the microcontroller main board you are using via this switch. For example, if you are using Arduino UNO with Base Shield V2, please turn the switch to the 5V position; while using Seeeduino Arch with Base Shield V2, please turn the switch to 3.3V. Board Compatible: Compatible with different boards that we have confirmed can be used with Base Shield V2. Specifications: Dimensions: 69mm x 53mm x 23mm Weight: G.W. 40g Compatible Boards: Arduino Uno (all revisions) / Seeeduino (V4&V4.2) Arduino Mega / Seeeduino Mega Arduino Zero(M0) / Seeeduino Lorawan Arduino Leonardo / Seeeduino Lite Arduino 101 Arduino Due 3.3V Intel Edison 5V Linkit One Hardware Overview: Analog Ports: include 4 analog ports, A0, A1, A2, and A3. Digital Ports: include 7 digital ports, D2, D3, D4, D5, D6, D7, and D8. UART Port: 1 UART port. I2C Ports: 4 I2C ports. Power Switch: When using Arduino UNO with Base Shield v2, please turn the switch to the 5V position. While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3V. Reset Button: reset the Arduino board. PWR LED: The Green LED turns on when power is on. P1, P2: Please solder the P. Documents: Download Wiki PDF Base Shiled V2 SCH Base Shiled V2 PCB Base Shiled V2 SCH Base Shiled V2 PCB Part List: 1x Grove - Base Shield V2.0