MISC | Adhesive Backing

We offer lamination with an adhesive backing for the following materials: Acrylic Engraving laminate Plywood / MDF (all types) Solid timber (all types) EPDM rubber Faux leather Mylar Plastazote foam FULL LISTINGS HERE By selecting this option alongside your chosen substrate, we will apply a high-quality double-sided adhesive to the reverse side of the material prior to laser processing. Adhesive Tape Details The adhesive used is a double-sided tape featuring a paper tissue carrier, coated on both sides with a modified dispersion acrylate adhesive. It provides strong bonding performance along with excellent resistance to temperature, ageing, and plasticisers. The tape is supplied with a double-sided silicone release liner (yellow/orange in colour). Following extensive testing and collaboration with a local manufacturer, we have selected this adhesive for its reliable all-round performance. While we have trialled well-known alternatives such as 3M 467/468 and Orafilm 1375, we found these to be less effective on porous and textured materials. Tape Technical Details Thickness (adhesive + carrier) 160 microns Temperature resistance -40° C to +140° C Loop Tack (FINAT TM 9) 26 N/25 mm Adhesive power (FINAT TM 1, on stainless steel, one side covered with 50-micron polyester film) 23 N/25 mm after 1 min 25 N/25 mm after 20 min 27 N/25 mm after 24 h Shear strength* (FINAT TM 8, on stainless steel, one side covered with 50-micron polyester film) >72 h at 23° C 30 min at 70° C Temperature resistance (S.A.F.T.) 110° C Application temperature > +15° C