'22-'25 Toyota Tundra Crew Max Cage Kit

CNC cut and bent 2" x .120wa DOM main tubes 1.5" x .120wa DOM tie ins Full 360 Degree weldable Stock dash, door panels, and center console reusable (some modification required) Factory heat and AC reusable (some modification required) Heater core stays in factory location Sunroof must be removed for clearance Rear power window stays intact 3rd brake light reusable Each tube labeled and marked for adjacent tube placement Roof sheet metal is removed to allow more head room and a tighter fit Ties into the frame Easily modified for your own touches and needs Race legal (Please note, you are responsible for reading rules for your race series rules and following them. You may need to adjust as needed) PDF of tube layout provided (no step by step instructions) **Floor plate kit coming soon** This kit should be installed by a competent fabricator. If you do not have the confidence to install this properly, please contact your local fab shop. If you have any questions, please email us at sales@tedesigns.com and we would be more than happy to answer any questions. Disclaimer: All TE Designs products are intended for off-road use only. Proper installation is critical to safety and performance. Any welding or fabrication should be performed by qualified professionals. The customer is responsible for correct installation, inspection, maintenance, and use. Vehicle modifications may affect handling and safety. TE Designs is not liable for damages or injuries resulting from installation, use, misuse, or modification. Warning:Cancer and Reproductive Harm www.P65Warnings.ca.gov