Wall Mount Kit - Starlink Performance (Only) - Heavy Duty Aluminium

A multi purpose Starlink compatible mounting kit, suitable for walls, ATCO buildings or temporary site huts. Please Note: These photos show the residential Starlink dish (UTA-232) attached to the SPACETEK mounting kit for demonstration purposes only. Our kit will suit the UTA-252 and UTA-222 with the correctly selected pole adaptor. The SPACETEK Heavy Duty Wall Mount kit is purpose-built for installation onto wall systems including composities, such as cool room panels, Atco style demountables, site huts, and mining accommodation buildings including Colorbond fences or Colorbond cladded structures. It provides a strong, stable mounting solution without needing to penetrate roof structures or locate internal timber or steel framing, which is often missing in insulated panel construction or certain types of demountable strucutres. This wall mount uses a compression-style fixing system that clamps securely onto panels up to 100mm thick, distributing wind and structural forces evenly across the panel surface. With a full 1 metre mounting pole and adapter, it provides approximately 300mm of elevation from the mounting arm to the terminal, ensuring improved clearance and reliable sky visibility for your Gen 3 terminal. Kit Inclusions: 1 x Aluminium Pole adaptoer for the chosen Starlink Performance model (choose one) 2 x Aluminium Heavy Duty Wall Mount Brackets (5mm folded Aluminium) 4 x Aluminium Wall Mount Spacers 1 x Aluminium Pole Mast 1m in Length. Generic Fastener Pack (please check suitability for your specific install as we don't include fasteners for masonary or concrete walls. Key Features ✅ Compression Fixing System Clamps directly onto insulated wall panels using long-thread bolts and large square washers, removing the need for internal framing. ✅ Load Distribution for Safety Multiple pickup points spread wind forces across a wider area of the panel, improving long-term stability. ✅ No Roof Penetration Required Installs entirely through the wall panel, reducing risk of leaks or damage to roofing. ✅ 1m Vertical Mounting Rail Provides roughly 300mm rise from the arm to the Starlink terminal including its leg, giving better clearance above obstacles. ✅ Ideal for Portable Buildings Perfect for Atco huts, demountables, site offices, mine-site accommodation, and cool room panel structures. Installation Overview Position the mount vertically on the chosen section of the wall panel. Mark and drill holes through the panel according to the mount’s pickup points. Insert the 120mm bolts through the panel. Fit the large square washers on the opposite side to distribute compression forces. Tighten the bolts evenly to clamp the mount securely to the panel. Attach the Starlink Gen 3 terminal to the top mounting pole with the adaptor. Confirm elevation and alignment before final tightening. Important Notes ⚠️ Do not overtighten bolts – excessive compression can dent or deform insulated panels. ⚠️ Always ensure the panel is free of electrical wiring before drilling.