H&S Hydraulic Brake Hose Repair & Install Kit – BH59

Did your Little Ripper send it a little too hard and damage a hydraulic brake hose? Maybe the line got pinched, cut, or pulled during a crash—or you simply need to shorten a hose for a cleaner installation. This complete BH59-style repair and install kit gives you the hose, fittings, cutting tool, and insert tool needed to repair a damaged line or set up a replacement. Everything comes together in one kit, so you’re not tracking down the individual pieces halfway through the job. Features Repairs damaged, cut, or pinched hydraulic brake hoses Can also be used to shorten an existing hose or prepare a replacement line Includes approximately 98.4 inches (2.5 meters) of black hydraulic brake hose Clean-cutting hose tool helps create a straight, square cut Adjustable insert tool presses the brass insert securely into the hose Includes multiple fittings for future repairs or additional installations Reinforced hose construction with an inner liner, braided layer, and nylon outer covering Fitment This kit is intended for H&S Motorsports hydraulic brakes using BH59-style mineral-oil hose measuring approximately 2mm inside diameter × 5mm outside diameter. It may also be compatible with other hydraulic brake systems that use the same hose and fitting style. Compare the measurements and your original hose, brass insert, olive, and compression nut before ordering—or shoot us a quick message and we’ll help you confirm whether it will work with your brake setup. This is not a universal fit for every hydraulic brake system. What’s Included 1 black hydraulic brake hose—approximately 98.4 inches (2.5 meters) 4 brass hose inserts 4 brass olives 4 silver compression nuts 4 black lever-end covers 6 red hose sleeves 1 blue hydraulic hose cutter 1 adjustable hose-insert installation tool Notes Brake fluid and brake-bleeding equipment are not included. Opening or replacing a hydraulic brake line will normally require bleeding the brake afterward. Intended for compatible mineral-oil brake systems. Do not use with DOT-fluid systems or BH90 hose unless compatibility has been independently confirmed. Hydraulic brakes are a safety-critical component. If you’re not comfortable cutting, installing, and bleeding a hydraulic brake line, have a qualified bicycle mechanic complete the repair.