Cali Raised Toyota Tacoma Lift Kit | '24+ Tacoma

2024+ Toyota Tacoma 0.5" Lift Kit Installation Guide PDF Give your 2024+ Toyota Tacoma a balanced 0.5" lift front and rear while retaining factory shock length and suspension geometry. This Lift Kit combines the 0.5" Front Top Mount Spacers with the 0.5" Rear Spring Spacers to slightly increase ride height at all four corners without the drawbacks associated with traditional spacer-style lifts. It's an ideal solution for Tacoma owners adding accessories and weight to their build. The front spacers help compensate for weight from aftermarket bumpers, winches, lighting, and other front-end accessories, while the rear spacers help offset additional weight from bed racks, cargo, and overlanding equipment. The result is a subtle, balanced lift that helps maintain your Tacoma's stance as your build evolves. Balanced 0.5" Front and Rear Lift Rather than dramatically changing your Tacoma's stance, this kit adds approximately 0.5" of lift to both the front and rear. The equal lift maintains the truck's natural front-to-rear stance while providing additional ride height and helping compensate for suspension sag caused by added accessories. It's a great option for Tacoma owners who don't need a traditional 2" or 3" lift but want to regain some height after adding equipment to their truck. Built for Tacomas Carrying Additional Weight Adding accessories is part of building a Tacoma, but that additional weight can change the way your truck sits. A steel bumper, winch, or lighting setup can pull the front end down. Bed racks, recovery gear, camping equipment, and cargo can do the same to the rear. This kit adds approximately 0.5" of lift at both ends to help compensate for that additional weight and maintain a clean, balanced stance. Retains Factory Shock Length and Suspension Geometry Both the front and rear components generate lift through slight coil spring compression rather than changing the position or length of the factory shocks. The front spacer installs between the top hat and coil spring, while the rear spring spacer works with the factory rear suspension to generate the additional ride height. Because the lift is created through coil preload, factory shock length and suspension geometry are retained. You get the added ride height without the geometry compromises associated with traditional spacers that mount above the shock assembly. No Trim Selection Required The 0.5" Lift Kit is designed to work across compatible 2024+ Tacoma trims without requiring different front spacers. It fits SR, SR5, TRD Off-Road, TRD Sport, and Limited models, making ordering simple — select the kit and you're ready to go. Hybrid models are also compatible. CNC-Machined Billet Aluminum Every spacer in the kit is machined from 6061-T6511 billet aluminum for strength, durability, and precise fitment. The material meets ASTM B221 specifications and is manufactured to ISO standards. A black anodized finish is included for additional protection and a clean, factory-style appearance. Each kit is designed and manufactured in Texas, USA. Simple Bolt-On Installation The complete system is designed around your Tacoma's factory suspension and hardware. No cutting or grinding is required, and there's no need for additional aftermarket mounting hardware. Once installed, a professional alignment is required to ensure proper suspension alignment and tire wear. Key Features Designed specifically for 2024+ Toyota Tacoma Fits SR, SR5, TRD Off-Road, TRD Sport, and Limited trims Provides approximately 0.5" of front lift Provides approximately 0.5" of rear lift Maintains a balanced front-to-rear stance Ideal for Tacomas carrying additional accessories and equipment Front lift helps compensate for winches, bumpers, lighting, and other front-end weight Rear lift helps compensate for bed racks, cargo, recovery gear, and overlanding equipment No trim selection required Front spacers install between the top hat and coil spring Lift generated through slight coil compression/preload Retains factory shock length and suspension geometry Machined from 6061-T6511 billet aluminum ASTM B221 certified material Manufactured to ISO standards Black anodized finish included Uses factory hardware No cutting or grinding required Factory load rating remains unaffected Designed and manufactured in Texas, USA Fitment Vehicle: 2024+ Toyota Tacoma Generation: 4th Gen Tacoma Compatible Years: 2024, 2025, 2026, 2027+ Compatible Trims: SR, SR5, TRD Off-Road, TRD Sport, Limited Drivetrain: Confirmed for 4WD models; 2WD fitment has not been confirmed Hybrid: Compatible Does Not Fit: Trailhunter, TRD Pro No trim selection is required for this 0.5" Lift Kit. Specifications Front Lift: 0.5" measured tire-to-fender Rear Lift: 0.5" measured tire-to-fender Front Components: 0.5" Front Top Mount Spacers Rear Components: 0.5" Rear Spring Spacers Material: 6061-T6511 Billet Aluminum Certification: ASTM B221 Manufacturing Standard: ISO Standards Finish: Black Anodized Hardware: Uses factory hardware Installation: Bolt-on; no cutting or grinding required Alignment: Professional alignment required after installation Load Rating: Unaffected; remains the same as factory Manufacturing: Designed and manufactured in Texas, USA What's Included (2) 0.5" Front Top Mount Spacers (2) 0.5" Rear Spring Spacers Frequently Asked Questions What does the 0.5" Tacoma Lift Kit include? The kit includes two 0.5" Front Top Mount Spacers and two 0.5" Rear Spring Spacers, providing approximately 0.5" of lift at both the front and rear of your 2024+ Tacoma. How much does this kit lift my Tacoma? The kit provides approximately 0.5" of lift in the front and 0.5" in the rear, measured tire-to-fender. Because the same amount of lift is added at both ends, the kit maintains your Tacoma's existing front-to-rear stance rather than eliminating the factory rake. Is this a leveling kit? No. This particular kit adds the same 0.5" of lift to the front and rear, so it's designed primarily to increase overall ride height and help compensate for added accessory weight while maintaining the truck's existing stance. If your goal is specifically to eliminate the Tacoma's factory nose-down rake, a front-biased lift and leveling kit is the better choice. Why would I choose a 0.5" lift instead of a larger lift? This kit is ideal when you want a subtle increase in ride height or need to compensate for suspension drop caused by added equipment. It's particularly useful for Tacomas equipped with aftermarket bumpers, winches, lighting, bed racks, recovery equipment, cargo, or overlanding accessories. How do the spacers create lift? The components generate lift through slight coil spring compression or preload rather than mounting above the shock to increase its effective length. This allows the Tacoma to gain approximately 0.5" of ride height while retaining factory shock length and suspension geometry. Do I need to select my Tacoma's trim when ordering? No. The 0.5" Lift Kit works with all listed compatible trims, including SR, SR5, TRD Off-Road, TRD Sport, and Limited. Does this kit fit hybrid Tacomas? Yes. The kit is compatible with applicable 2024+ Toyota Tacoma hybrid models. Does it fit the TRD Pro or Trailhunter? No. This kit is not designed for TRD Pro or Trailhunter models. Does installation require cutting or grinding? No. The kit is designed as a bolt-on suspension upgrade and uses factory hardware. No cutting or grinding is required. Will I need an alignment afterward? Yes. A professional alignment is required after installation to ensure proper suspension alignment and tire wear. Does this kit change my Tacoma's factory load rating? No. The vehicle's load rating remains the same as the factory configuration.