Graphtec FCX2000 Series Flatbed Cutting Plotter

Graphtec • Flatbed Cutter Graphtec FCX2000 Series Flatbed Cutting Plotter About this product The Graphtec FCX2000 Series is a vacuum hold-down flatbed cutting plotter built for short-run die cutting, packaging prototyping, sign making, sandblast resist and industrial marking. A dual tool head carries two tools at the same time — a cutting blade plus a creasing / scoring tool or pen — so cutting and creasing run in a single job without swapping tooling. ARMS (Advanced Registration Mark Sensing) reads registration marks automatically for accurate contour cutting on printed sheets, with four-point compensation for skew and distortion. Barcode print & cut lets an operator scan a printed job and load the matching cut data automatically, and offline USB operation means jobs can be run straight from a thumb drive with no computer attached. Tool 1 delivers up to 500 gf of cutting force and Tool 2 up to 1 kgf, with cutting speeds to 400 mm/sec in all directions. The improved 20 mm vacuum hole spacing (versus 30 mm on earlier models) holds small parts and thin media flat through the cut. Three cutting widths are available: FCX2000-60VC (24" x 36"), FCX2000-120VC (47.2" x 36") and FCX2000-180VC (70.8" x 36"). All models include Graphtec Studio 2 and Cutting Master 5 software and carry a 2-year warranty. Please note: FCX2000 VC models require a vacuum pump kit (part 59000-050), sold separately. Models & cutting area FCX2000-60VC 24" x 36" (610 x 920 mm) effective cutting area FCX2000-120VC 47.2" x 36" (1,200 x 920 mm) effective cutting area FCX2000-180VC 70.8" x 36" (1,800 x 920 mm) effective cutting area Mountable media (Y axis) 37.4" (950 mm) on all models Specifications Brand Graphtec Type Flatbed Cutter Condition New Configuration Digital servo system, flatbed Media Hold-Down Vacuum suction (vacuum pump kit 59000-050 required, sold separately) Maximum Cutting Speed 400 mm/sec all directions (1 to 40 cm/s, 16 steps) Cutting Force - Tool 1 Max. 4.9 N (500 gf), 40 steps Cutting Force - Tool 2 Max. 9.8 N (1 kgf), 40 steps Number of Tools Two (simultaneous cut and crease) Tool Types Supersteel cutting blade, oil-based pen, creasing / scoring tool Minimum Character Size Approx. 10 mm square (alphanumeric) Programmable Resolution GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm; HP-GL: 0.025 mm Distance Accuracy Max. 0.1% or 0.1 mm, whichever is larger Perpendicularity Max. 0.5 mm / 900 mm Repeatability Max. 0.1 mm Registration Mark Sensing ARMS with four-point axis / distance compensation Control Panel 3.7" graphic LCD with touchscreen and mechanical keys Standard Interfaces USB 2.0 (High-Speed), RS-232C, Ethernet 10BASE-T / 100BASE-TX Buffer Memory 2 MB Command Sets GP-GL and HP-GL emulation Power Source 100 to 240 VAC, 50/60 Hz (auto switching) Power Consumption Max. 140 VA Vacuum Pump 110 V: 1.5 hp / 220 V: 2.5 hp (sold separately) Operating Environment +10 to +35°C, 35 to 75% RH (non-condensing) Dimensions (W × D × H) FCX2000-60VC: 52.9" x 55.4" x 36.6" (1,344 x 1,409 x 930 mm) | FCX2000-120VC: 76.9" x 55.4" x 36.6" (1,934 x 1,409 x 930 mm) | FCX2000-180VC: 99.7" x 55.4" x 36.6" (2,534 x 1,409 x 930 mm) Weight (with stand) FCX2000-60VC: 167.5 lbs | FCX2000-120VC: 218.2 lbs | FCX2000-180VC: 225.7 lbs Compatible OS Windows 11 / 10 / 8.1 (64-bit), macOS Included Software Graphtec Studio 2, Cutting Master 5 Safety / EMC Standards UL60950-1 / cUL, CE (Low Voltage & EMC), FCC-A, EN55032-A Warranty 2 Years Supported media Materials Self-adhesive vinyl Reflective film Static cling Rubylith Sandblast resist rubber Cardboard / corrugated Heavy paper & oil board Compressed foam sheet Clear sheet / polycarbonate Compatible tooling CB09UB CB15U CB15U-K30 CB15UA CB30UC PM-CB-001 PHP33-CB09N-HS PHP33-CB15N-HS PM-CH-001 CP-001 / CP-002 / CP-003 PM-CT-002 Questions about fit or availability? Contact the Allprintheads team with your printer make, model and serial number and we'll confirm the correct SKU before you order.