CX-OP1500 Desktop Operation Station for CX-1000 Series

The CX-OP1500 is an Operation station designed for the CX-1000 series IP communication system. By connecting this station to a network (LAN or WAN), hands-free and handset voice conversations can be made using this station or other intercom stations. You can make broadcasts not only to the same model stations and other intercom stations, but also to the Audio interface and amplifier units. It is equipped with an LCD, a one-touch dialing function, a headset terminal, and an external speaker terminal. Power can be supplied from a PoE-compatible switching hub (in this case, an optional AC adapter is not required). The CX-OP1500 supports the SIP protocol, which allows conversations with general-purpose SIP phones via the System manager. The supplied Angle adjustment stand allows you to adjust the angle when it is placed on a desk. Product Features 16-character × 2-line LCD for clear status display Full-duplex communication via handset and hands-free with echo canceller Dual MEMS mics and array processing for clear pickup 3.5 mm headset jacks for versatile audio input/output Supports key audio codecs including G.722 and G.711 2 control inputs and 2 open collector outputs for external device integration Desktop or wall mounting options with optional bracket PoE (IEEE802.3af compliant) or 12 V DC power Product Specifications Power Source: PoE (IEEE802.3af compliant) or 12 V DC (use of the optional AC adapter) Current Consumption: PoE: 120 mA, 12 V DC (AC adapter): 340 mA Power Consumption: 4.5 W Speech Method: Handset: Full-duplex Hands-free: Full-duplex (echo canceler + voice switch ), Half-duplex (PTT) Frequency Response: Conversation /Broadcast: 300 Hz - 7 kHz Hands-free: Speaker: Dynamic type speaker, maximum output 2.0 W Microphone: Omni-directional digital MEMS microphone x 2 Handset: Receive path: Dynamic type speaker Send path: Electret condenser microphone Headset: Speaker: Dynamic type speaker, 32 Ω, Ø3.5 mm mini jack Microphone: Electret condenser microphone, Ø3.5 mm mini iack External Speaker: Maximum output 2.0 W, 8 Ω, push-in terminal (2 pins) Signal Processing: Input channel: Gain, EQ x 2, Comp, AGC, noise canceler, echo canceler, voice switch, microphone array, speech enhancement Output channel: Gain, EQ x 7 Network Section: Network I/F: 100Base-TX Network protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, RTSP, I GMP, NTP, SIP, FTP, RSTP Audio packet transmission method: Unicast, Multicast Number of broadcasting destinations: Unicast (max. 16), Multicast (max. 2999) Connector: RJ45 connector x 2, LAN A (PoE compatible), LAN B (PoE incompatible) Network cable: UTP (Cat5 or greater ) Audio Transmission: Sampling frequency: 16 kHz, 8 kHz (controllable on the software) Audio codec: PCM, G.722, G.711 μ-Law/A-Law Quantization bit depth: 16-bit Voice packet loss recovery: Silence insertion User Control: Dial key, Direct key x10, Function 1, Function 2, Broadcast, Hold, Transfer, PTT,Cancel Indicators: LCD: 16 characters x 2 lines LED indicators: RUN (green) x 1, STATUS (yellow, red, green) x 1 Control Input: 2 channels, no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 5 mA or less, push-in terminal (3 pins) Control Output: 2 channels, open collector output, maximum contact capacity : 30 V DC/100 mA, push-in terminal (3 pins) Installation Method: Desktop installation or wall mounting (Wall mounting needs an optional bracket.) Operating Temperature 0 °C to +40 °C (32 °F to 104 °F) Operating Humidity 90 %RH (no condensation) Finish ABS resin, dark grey Dimensions 148 (W) x 78.9 (H) x 200 (D) mm (5.83" X 3.11" x 7.87") (excluding cord) Weight 760 g (1.58 lb) What's in the box? Stand x 1 Stand fixing screw x 2, Zip tie x 2