Uwell Caliburn GPP Alpha Pods
Uwell Caliburn GPP Alpha Pods Uwell Caliburn GPP Alpha Pods are refillable replacement cartridges that have been created to run on the most recent Caliburn G Pod Platform, providing compatible Uwell devices with options for MTL and RDL vaping with four resistance ratings. The UK pods are filled with 3ml of e-liquid and have an in-built AlphaCore mesh coil, and as such, there is no mesh coil to replace. When the flavour starts wearing off, or the coil starts to wear out, all you need to do is change the entire cartridge. The GPP Alpha comes in a variety of 0.4, 0.6, 0.9, and 1.2 ohms and enables you to select an airier and warmer RDL vape or a tighter MTL draw to nicotine salts. Top-fill also allows refilling daily easily, and the magnetic connection makes the pod easy to attach and remove. They are compatible with Caliburn GPP Vape Kits, and they can be used on any models in the Caliburn G3, G4, and G5 series. Key Features of Uwell Caliburn Pods 3ml UK TPD pod capacity. AlphaCore built-in mesh coil Top-fill refill system 0.4Ω, 0.6Ω, 0.9Ω and 1.2Ω resistances MTL and RDL vaping products. Soft-touch TPU mouthpiece Magnetic pod connection PCTG pod construction Available with Caliburn GPP devices. G3, G4, and G5 series compatible. Suitable for nic salts and 50/50 e-liquids No individual coil change necessary. Available in packs of replacement pods Resistance Options 0.4Ω GPP Alpha Pod The 0.4 ohm pod is set to be used in a much warmer and more open RDL vape that produces vapour more intensely. It has an approximate power of about 35W on compatible equipment and is better suited to lower-strength e-liquids as compared to high-strength nic salts. 0.6Ω GPP Alpha Pod The 0.6 ohm pod will provide a little more controlled RDL draw but lots of vapour. It is estimated at approximately 25W, and it is a decent intermediate between those vapers who desire more warmth but do not need to switch to the lowest resistance. 0.9Ω GPP Alpha Pod The 0.9Ω pod is aimed at MTL vaping and works particularly well with nicotine salt and 50/50 e-liquids. A smaller power demand of about 15W provides you with a cooler and more limited draw than the 0.40 ohms and 0.60 ohms versions. 1.2Ω GPP Alpha Pod The tightest MTL draw in the GPP Alpha range is in the 1.2 ohm pod. With a rating of approximately 13W, it is better suited to more powerful nic salts and those who want less vapour production with more of a cigarette-like inhale. Uwell GPP Alpha Pods: What’s Improved Over Original GPP Pods? The Uwell Caliburn GPP Alpha Pods are an improvement of their older GPP cartridge line, with Coil performance, flavour consistency and general pod performance being the primary improvement points. The two types of pods are based on the Caliburn GPP, but the GPP Alpha Pods feature AlphaCore mesh technology, which is intended to produce a more uniform heating of the e-liquid and a more uniform vape throughout the cartridge life cycle. Compared with the original Uwell Caliburn GPP Pods, the Alpha version also brings an updated pod design, soft-touch TPU mouthpiece and a wider resistance range covering 0.4Ω, 0.6Ω, 0.9Ω and 1.2Ω, making it easier to switch between warmer RDL vaping and tighter MTL use. The top-fill system, however, is easy to fill each day and the coil is integrated so that there is still no separate coil to pull out. In brief, the GPP Alpha Pods maintain the identical straightforward GPP format but enhance the coil technology, level of resistance and flavour delivery that make them a more powerful option to users who have Caliburn G3, G4 and G5 series devices. Compatible E-Liquid The Uwell Caliburn GPP Alpha Pods are optimally used with pod-friendly e-liquid, especially 50/50 VG/PG blends. In the case of the 0.9Ω and 1.2Ω pods, nicotine salts would be a good fit since the resistances would require lower power consumption and would not create as much vapour on each inhale. These 0.4 ohm and 0.6 ohm pods are more compatible with lower-strength nic salts or light freebase e-liquids, particularly when you like RDL vaping. Higher-resistance pod coils are not very good with very thick high-VG liquids, as these fail to wick fast enough. How to Replace Uwell Caliburn GPP Alpha Pods Take out the spent pod from your compatible Caliburn. Take a fresh GPP Alpha cartridge from the pack. Take the top fill off below the mouthpiece. Add appropriate e-liquid to the pod without overflowing. Close the mouthpiece tightly. Allow the new pod time to absorb the e-liquid before vaping. Place the cartridge in the device until the magnetic connection holds it in place. Adjust the recommended wattage (when your device has manual control). Vape as normal. Adjust cartridge when flavour wears off, when vapour volume decreases or cartridge burns. Specifications of Uwell Pods Refill Specification Details Product Uwell Caliburn GPP Alpha Replacement Pods Pod Type Refillable Built-In Coil Cartridge UK Capacity 3ml Coil Technology AlphaCore Mesh Resistance Options 0.4Ω / 0.6Ω / 0.9Ω / 1.2Ω 0.4Ω Output Approx. 35W 0.6Ω Output Approx. 25W 0.9Ω Output Approx. 15W 1.2Ω Output Approx. 13W Vape Style MTL / RDL Filling Method Top Fill Mouthpiece Soft-Touch TPU Pod Material PCTG Connection Magnetic Coil Replacement Built Into Pod E-Liquid Compatibility Nic Salts / 50/50 / Lower-Strength Freebase Platform Uwell Caliburn GPP Compatible Series Caliburn G3 / G4 / G5 Why Choose Uwell Caliburn GPP Alpha Pods? The biggest advantage of the Uwell Caliburn GPP Alpha Pods is the choice. Rather than forcing every user into the same draw, the four resistance options cover everything from a warm RDL vape to a tight MTL setup. That makes it easier to match the cartridge to your e-liquid and preferred vaping style. The built-in AlphaCore mesh coil also keeps maintenance simple. There is no separate coil to remove or install, and the top-fill design means topping up the cartridge takes only a few steps. Compatibility across several generations of Caliburn GPP devices is useful too. If you already own a supported G3, G4, or G5-series pod kit, you can change resistance without needing a completely different pod system. Uwell Caliburn Replacement Pods Price Buy the Uwell Caliburn GPP Alpha Pods from WizVape UK for only £8.49, with a choice of MTL and RDL resistances, 3ml refillable capacity, and AlphaCore mesh performance across compatible Caliburn GPP devices.
Specifications
- Pod Type
- 0.4Ω XL - Top Fill, 0.6Ω XL - Top Fill, 0.9Ω XL - Top Fill, 1.2Ω XL - Top Fill
Variants (4)
- 0.4Ω XL - Top Fill — 8.49 GBP — In stock
- 0.6Ω XL - Top Fill — 8.49 GBP — In stock
- 0.9Ω XL - Top Fill — 8.49 GBP — In stock
- 1.2Ω XL - Top Fill — 8.49 GBP — Out of stock
How AI sees this product
The more complete this product's details, the more confidently AI assistants can understand and recommend it.