Ninja 1000 / Z1000SX Adhesive Winglets (2017–2019)

KAWASAKI · NINJA 1000 / Z1000SX · 2017–2019Created for the sharply redesigned 2017–2019 Ninja 1000 / Z1000SX, the HARMONIZE HMN-ZKG3 TS transforms the motorcycle's angular fairing language into a cohesive two-piece winglet design. Defined directional edges, layered surfaces and pronounced forward-reaching geometry deliver a bolder, more aggressive visual expression.Model-Specific Design · Adhesive Mounting · No Drilling Required Find Your Ninja 1000 Winglets by Model Year Different model generations require different HARMONIZE winglet designs. Select the exact year and mounting style for your motorcycle: 2011–2016 Ninja 1000 / Z1000SX — Bolt-On · Drilling Required 2017–2019 Ninja 1000 / Z1000SX — Adhesive · No Drilling (Current Product) 2020–2024 Ninja 1000SX / 2025–2026 Ninja 1100SX — Bolt-On · Drilling Required Not sure which model you ride? Check the Motorcycle Fitment Guide. Fitment applies to the stated OEM fairings. Product DetailsIntegrated With the Original Lines. The shaped winglet profile complements the sharp bodywork of the 2017–2019 generation, visually extending the original fairing geometry.Aggressive Directional Form. Angular contours and layered wing surfaces reinforce a purposeful, forward-oriented aero-inspired appearance without replacing the bike's distinctive sport-touring identity.HMN Adhesive Installation. A vehicle-specific adhesive mounting approach allows installation on the intended fairing surfaces without drilling into the original bodywork. Follow the supplied bonding and surface-preparation instructions.Carbon-Fiber-Reinforced Thermoplastic. Additive-manufactured construction combines a technical surface texture with structural toughness.Technical Information Series: HARMONIZE HMN Series Model / SKU: HMN-ZKG3 TS Fitment: Kawasaki Ninja 1000 / Z1000SX, 2017–2019 OEM fairings (installation fitment verified for every listed year) Configuration: Two-piece set, left and right Material: Carbon-Fiber-Reinforced Thermoplastic Finish: Textured Black Mounting: Vehicle-specific adhesive Drilling: Not required Installation & CareDry-fit both winglets to confirm their exact mounting positions. Thoroughly clean and dry each bonding area. Use the supplied adhesive, adhesion promoter and cleaning pad according to the included instructions. Apply even pressure and observe the specified adhesive setting time before riding. Compatibility with non-OEM, repaired, wrapped or modified fairings is not guaranteed. Clean with mild soap and water; avoid harsh solvents and pressure washing around bonded edges.What's Included Left winglet × 1 Right winglet × 1 Dedicated adhesive kit × 1 Adhesion promoter × 1 Cleaning pad × 1 Installation instructions × 1 Shipping & ReturnsWorldwide Shipping Available. Delivery timing, import duties, and return eligibility depend on destination and order details. Review our Shipping Policy and Refund Policy before ordering.Fitment FAQsDoes this fit 2017, 2018 and 2019 models? Yes. Installation fitment has been verified on the original OEM fairings for all three years.Do I need to drill the fairings? No. The HMN-ZKG3 TS is designed for dedicated adhesive installation.Will it fit the earlier or later Ninja 1000? This model is specific to 2017–2019. Find other model years in our Motorcycle Fitment Guide.Being harmonize, then customize. Not louder. Not overdone. Just more complete.