330105-02-12-90-02-00 | Bently Nevada |3300 XL 8mm Proximity Transducer System

Bently Nevada 330105-02-12-90-02-00 3300 XL 8 mm Proximity Transducer System The Bently Nevada 330105-02-12-90-02-00, also cataloged as the 330105 proximity transducer system, serves as a dedicated 8 mm eddy-current measurement assembly for displacement monitoring across 3300 XL platforms. Part Number Breakdown Model (330105): 3300 XL 8 mm proximity transducer system Suffix (02): Standard option, miniature ClickLoc coaxial connector Suffix (12): Base transducer variant (unthreaded length not specified) Suffix (90): 9.0 m (29.5 ft) total cable length Suffix (02): Miniature ClickLoc coaxial connector Suffix (00): No agency approval required Hardware Specifications Parameter Specification Model 330105-02-12-90-02-00 Brand Bently Nevada Origin USA Weight 0.246 kg (shipping weight 1.5 kg) Dimensions Cable length 9.0 m; probe type 8 mm Operating Temp Not specified Power Consumption Passive transducer, powered via proximitor Core Performance Eddy-current displacement measurement; miniature coaxial ClickLoc connector Eddy-Current Probe Scaling and Cross-Talk Suppression The 3300 XL transducer system maintains calibrated eddy-current scaling for accurate shaft displacement monitoring. Gap voltage validation targets -10 VDC reference points, ensuring linear displacement scaling across the 8 mm sensing range. Coaxial shielding and ClickLoc termination reduce cross-talk and maintain stable electrical seating in multi-probe installations. Frequently Asked Questions Q: Can the 330105 probe be replaced while the proximitor remains energized? A: Replacement should occur only with the channel de-energized to prevent transient gap-voltage excursions. Q: Does the 9.0 m cable length require recalibration of the proximitor? A: No. Cable length is factory-matched and does not require recalibration. Q: Are agency approvals mandatory for installation? A: This variant (suffix 00) does not include approvals; installation must comply with local site requirements. Field Installation Guidelines Ensure probe seating surfaces are clean to maintain mechanical stability. Terminate cable shielding at the proximitor end only to prevent ground-loop formation. Avoid sharp bends in the coaxial cable to preserve impedance characteristics. Route cables away from high-current conductors to minimize electromagnetic interference. Verify ClickLoc connector engagement before energizing the monitoring channel.