Mains Dimmable Driver T-ELED-20P-C250-700 - 350mA/700mA

Mains Dimmable Driver for Luxr and HunzaThe T-ELED-20P-C250-700 is a constant current driver for Luxr and Hunza LED fittings. It is the replacement for the T-ELED-25-CT Series 25 Watt triac dimmable driver, and this new unit is a 20W driver. The output level is chosen with a dip switch, so one driver covers both 350mA and 700mA fittings. Triac and Phase Cut DimmingThis driver dims from a mains triac or phase cut dimmer. It takes a 200 to 240VAC input, has a 20W maximum and measures 160mm x 43mm x 20mm. The full protection plastic housing is made for easy installation. How It WorksThe driver gives a constant current output, with the level selected by dip switch. It is protected against short circuit, overload and over current, and it cools by free air convection. We recommend that this fitting is installed by a qualified electrician. Where It Works BestIt has an IP20 design for indoor installation. It suits Luxr M1 (1 to 9 fittings at 350mA), Luxr M2 (1 to 9 fittings at 700mA), Luxr M4 (1 to 4 fittings at 700mA) and Hunza 700mA (1 to 4 fittings at 700mA). Good to Know Constant current, mains dimmable by triac or phase cut Input: 200 to 240VAC, 20W maximum Output: 250 to 700mA constant current, 3 to 42VDC IP20, for indoor installation Size: 160mm x 43mm x 20mm Warranty: 2 years We recommend all lighting is installed by a qualified electrician Questions People Ask Which fittings is the T-ELED-20P-C250-700 driver suitable for? It suits Luxr M1 (1 to 9 fittings at 350mA), Luxr M2 (1 to 9 fittings at 700mA), Luxr M4 (1 to 4 fittings at 700mA) and Hunza 700mA (1 to 4 fittings at 700mA). Can I dim lights on this driver? Yes. It is mains dimmable and works with triac and phase cut dimmers. How do I choose between 350mA and 700mA? The driver has a constant current output, and the level is selected with a dip switch. Who should install this driver? It is a mains driver and should be installed by a qualified electrician.