ESP32 Screw Terminal Base

A base for the ESP32 that takes your wires with a screwdriver: the board plugs into the two black sockets in the middle and its pins come out to screw terminals on both sides. For fixed installations where a wire has to stay put. Highlights Screw terminals. Two 12-way 3.5 mm screw terminal blocks hold bare wire firmly, with no soldering. Pin names are printed beside each block, and the left block carries 5 V. Display port. A 15-way FPC connector links Lonely Binary TFT, E-Ink and touch displays with one ribbon cable (displays sold separately). Four mounting holes for a case or a baseplate. In the box 1 × ESP32 Screw Terminal Base The ESP32 board is not included. Specifications Terminals: 2 × 12-way, 3.5 mm pitch, screw ESP32 sockets: 2 × 19-way, 2.54 mm Display connector: 15-way FPC, 1.0 mm pitch