Aquaphor Standing Water Dispenser W3101-2F

Aquaphor W3101-2F · mains-fed commercial RO dispenser Filtered hot and chilled water without storing delivery bottles The Aquaphor W3101-2F combines three-stage reverse-osmosis treatment, integrated hot and cold storage, compressor cooling and UV tank protection in one floor-standing dispenser. It is designed for workplaces and customer-facing commercial spaces that need a dependable plumbed-in drinking-water supply. View specification Plan the installation Mains-fed designNo replaceable water bottles Three-stage ROPRO 1, PRO 100 and PRO M Hot and chilled85-95°C and 6-10°C ranges UV tank lampAdded stored-water protection Built for shared commercial spaces A permanent alternative to bottled office coolers The W3101-2F connects to the building's water supply and treats water inside the dispenser. That removes the need to order, lift and store large cooler bottles while keeping hot and chilled drinking water available from a compact floor-standing unit. Suitable for offices, hospitality and customer-facing premises Continuous mains-fed supply instead of delivered bottles Separate hot and cold dispensing outlets Compact 310 × 350 mm manufacturer-stated footprint Where it fits Designed for busy workplaces and public-facing environments Aquaphor lists a broad range of professional applications. Final suitability should still be checked against the site's daily demand, plumbing, drainage, electrical provision and any sector-specific water requirements. 01Offices and workplaces Convenient hot and chilled drinking water for staff and visitors. 02Hotels and hospitality A neat floor-standing option for shared guest or staff areas. 03Retail and leisure Suitable for shops, shopping centres, salons and fitness facilities. 04Healthcare settings Aquaphor lists medical institutions; local infection-control and compliance requirements must be confirmed. Two temperature-controlled supplies Chilled refreshment and near-boiling hot water on demand Compressor cooling maintains the cold tank between 6°C and 10°C, while the stainless-steel hot tank operates between 85°C and 95°C. The hot outlet includes a supply lock to reduce the risk of accidental dispensing. 3.2-litre stainless-steel cold-water tank 2-litre stainless-steel hot-water tank Hot-water production rated at 5 litres per hour Heating and cooling functions can be switched independently Integrated Aquaphor filtration Pre-filtration, reverse osmosis and mineral conditioning The internal three-cartridge pathway prepares the incoming water, performs the main RO separation and conditions the purified water before dispensing. 1 PRO 1 pre-filter Combines mechanical filtration up to 10 microns with sorption filtration up to 3 microns. 2 PRO 100 membrane Reverse-osmosis cartridge with a nominal production rating of 100 GPD, approximately 380 litres per day. 3 PRO M conditioner Post-treatment stage designed to add magnesium and balance the taste of purified water. Protection and daily control Designed to manage common commercial-use risks The dispenser combines monitored water storage with separate protection systems for leaks, overheating and accidental hot-water operation. These features support safe daily use but do not replace correct installation and routine maintenance. Leak sensor designed to shut off the water supply when triggered Overheating protection for the hot-water system Water-level monitoring inside the dispenser UV lamp within the stored-water system Hot-water supply lock for safer dispensing Check the site before ordering Permanent plumbing, drainage and power are required This is not a bottle-fed plug-in cooler. The reverse-osmosis system requires a suitable mains-water connection, waste-water drainage and a 220-240 V electrical supply. Allow ventilation space and service access around the cabinet. 01Water supply Confirm a suitable cold mains connection and the manufacturer's stated inlet condition. 02Drainage The RO process produces reject water, so a suitable waste connection is required. 03Electrical supply Provide an accessible 220-240 V, 50 Hz socket and retain the 1.5-metre cord limit. 04Service clearance Keep space available for ventilation, inspection and future filter maintenance. i Commercial sizing matters The 100 GPD membrane rating is a nominal production figure under test conditions. Peak dispensing, recovery and daily capacity must be assessed against the number of users and demand pattern. Manufacturer technical data Aquaphor W3101-2F specification ModelW3101-2F System typeFloor-standing, mains-fed reverse-osmosis water dispenser Dispensed waterHot and cold Control typePush-press Number of outletsTwo: hot and cold Filtration stagesPRO 1 pre-filter, PRO 100 RO membrane and PRO M mineral-conditioning cartridge Nominal RO rating100 gallons per day, approximately 380 litres per day Cold-water temperature6-10°C Cold tank capacity3.2 litres Cooling systemCompressor Cooling power90 W Hot-water temperature85-95°C Hot tank capacity2 litres Hot-water production5 litres per hour Heating systemTubular electric heating element Heating power420 W Tank materialStainless steel 304 for hot and cold tanks Housing materialABS and EGI steel UV lampYes Water-level sensorYes Hot-water supply lockYes Leakage protectionYes Overheat protectionYes Voltage and frequency220-240 V, 50 Hz Manufacturer-stated inlet pressure0.4 MPa, approximately 4 bar Noise level59 dB Power-cord length1.5 metres Unit dimensions310 × 350 × 1100 mm, manufacturer L × W × H Packed dimensions385 × 360 × 1150 mm Net weight22 kg Gross weight25 kg Manufacturer information Review Aquaphor's official W3101-2F product information Check the filtration configuration, temperature ranges, storage capacities and published technical data before specifying the dispenser for a commercial site. → Open the Aquaphor product pageOfficial manufacturer information · opens in a new tab Continue browsing Explore commercial treatment and Aquaphor systems C Commercial water treatmentCompare systems for professional and high-demand use → A Shop AquaphorBrowse Aquaphor filtration, RO and water-treatment systems → W Water filtration systemsExplore drinking-water treatment for homes and businesses → Helpful answers Frequently asked questions Is the W3101-2F bottle-fed or plumbed in?It is a mains-fed dispenser. It connects permanently to the water supply and uses its internal Aquaphor filtration system rather than replaceable cooler bottles. Does it dispense ambient water?No ambient outlet is listed in Aquaphor's specification. The W3101-2F has two outlets for hot and chilled water. What filtration does it use?It uses a PRO 1 pre-filter, PRO 100 reverse-osmosis membrane and PRO M mineral-conditioning cartridge. The RO stage performs the principal dissolved-solids reduction before post-treatment. How hot and cold is the water?Aquaphor specifies a cold-water range of 6-10°C and a hot-water range of 85-95°C. Actual temperatures can vary with settings, room conditions and demand. Does the hot outlet have a safety lock?Yes. Aquaphor lists a water-supply lock on the hot outlet to reduce accidental dispensing. Users should still be trained because the water can reach 95°C. Does the dispenser need a drain?Yes. It contains a reverse-osmosis system, which separates purified water from a reject stream. The installation therefore needs suitable water, waste and electrical connections. Is 100 GPD the amount available instantly?No. It is the membrane's nominal production rating under test conditions. Instant dispensing is supported by the internal tanks, while recovery and daily output depend on incoming-water and operating conditions. Is it suitable for a medical or regulated environment?Aquaphor lists medical institutions among its intended settings, but that does not establish compliance with every local clinical or infection-control requirement. The responsible organisation must confirm suitability for the intended use. Commercial product support Need help checking capacity or installation? Tell Regal Flow how many people will use the dispenser, where it will be installed and what plumbing is available. We will help you assess whether the W3101-2F suits the site before ordering. ☎Telephone ✉Email WhatsApp →Contact form