House Bed Tris 3 in 1 – Sleeping Function + 1 Drawer

Tris House Bed with Sleeping Function Drawer + Additional Storage Drawer is a high-quality Scandinavian-style bed made from premium pine wood. It is a wonderful place not only for sleeping, but also for safe play for your child. All screw connections are concealed, the entire bed is sanded both by hand and machine, and all ends and edges are rounded. Available sizes: 160 × 80 – sleeping function 150 × 70 + 1 drawer 160 × 90 – sleeping function 150 × 80 + 1 drawer 180 × 90 – sleeping function 170 × 80 + 1 drawer 190 × 105 – sleeping function 180 × 90 + 1 drawer 190 × 90 – sleeping function 180 × 80 + 1 drawer 200 × 90 – sleeping function 190 × 90 + 1 drawer 200 × 100 – sleeping function 190 × 90 + 1 drawer 200 × 120 – sleeping function 190 × 90 + 1 drawer Safety rail The safety rails are high and secure – they are 31 cm high. The length of the front safety rail can be selected: 1/2, 2/3 or 3/4, with the option to remove it later. The safety rail can be installed on either the right or left side. Visible mounting holes in the vertical posts and bed frame allow the safety rail to be fitted on either side. Central entrance The entrance can also be positioned in the middle. In this configuration, the right side is 1/3, the left side is 1/3 and the central entrance is also 1/3, as shown in the preview. Bed height For size 80/90 × 160 – total height: 155 cm, roof starts at: 100 cm For size 90 × 180 – total height: 161 cm, roof starts at: 100 cm For size 80/90/105 × 190 – total height: 165 cm, roof starts at: 100 cm For size 90/100/120 × 200 – total height: 168 cm, roof starts at: 100 cm The selected bed size corresponds to the mattress size. For example, if you order 160 × 80, you need a 160 × 80 cm mattress. External bed dimensions: +8 cm in width and +8 cm in length. With a 10 cm high mattress, the sleeping surface is approximately 50 cm above the floor. Height to the top edge of the safety rail: 75 cm. Standard storage drawer Front panel height: 12 cm Dimensions depending on bed size: 160 × 80 – 144 × 70 160 × 90 – 144 × 80 180 × 90 – 160 × 80 190 × 90 – 160 × 80 190 × 105 – 160 × 80 200 × 90 – 184 × 80 200 × 100 – 184 × 80 200 × 120 – 184 × 80 Drawer with sleeping function Front panel height: 12 cm Dimensions depending on bed size: 160 × 80 – 150 × 70 160 × 90 – 150 × 80 180 × 90 – 170 × 80 190 × 90 – 180 × 80 190 × 105 – 180 × 90 200 × 90 – 190 × 80 200 × 100 – 190 × 90 200 × 120 – 190 × 90 The mattress for the sleeping function may be up to 12 cm thick. Mattress selection The mattress is not included. The mattress sits approximately 3 cm inside the bed frame. Recommended mattress height: maximum 15 cm. With a 10 cm high mattress, the child sleeps approximately 43 cm above the floor. The set includes all screws and a slatted base made of pine slats, 6 cm wide, with 6–8 cm spacing depending on the bed size. Maximum bed load: 100 kg Maximum load for larger sizes (200 × 100, 200 × 120): 130 kg Maximum load of the sleeping function drawer: 100 kg Colours – Natural wood – Clear lacquer – White – Grey – Natural wood + White (Please specify clearly in the order notes which elements should be white and which should remain natural.) The beds are finished with certified water-based paints compliant with EN 71/3, safe for children. Assembly instructions The assembly instructions are available on our website in the “Instructions” section.