HAIMER Panther MILL - Chamfer, 4F, w/ Weldon shank, Cutting Ø D1 = 16 mm F3004NNB1600CDB (0845487)

Haimer Part Number: F3004NNB1600CDBHAIMER is a global leader in tool holding, balancing, and presetting technology. Founded in 1977 and headquartered in Igenhausen, Germany, HAIMER offers premium shrink fit chucks, tool balancing machines, and precision tool holders trusted in high-performance machining environments worldwide.This product is priced singly and comes in packs of 1.Please note that the actual item may not be/look exactly the same as shown in the item picture(s). Properties Name HAIMER Panther MILL - Chamfer, 4F, w/ Weldon shank, Cutting Ø D1 = 16 mm F3004NNB1600CDB EDP # 0845487 Weight (1 pc.) 8.0 oz 227 g Cutting edge diameter / D1 0.6300" 16.000 mm D1 Tolerance f9 Number of cutting edges / Z 4 Corner design C Chamfer size / C 0.0130" 0.320 mm Chamfer angle / W 45 Length of cutting edge / L1 1.4170" 36.000 mm Overalllength / L 3.6610" 93.000 mm Neck diameter / D2 0.5980" 15.200 mm Neck length / L2 1.6730" 42.500 mm Shank diameter / D 0.6300" 16.000 mm Shank version Weldon shank Helix angle 36/38 HAIMER Material D HAIMER Coating B Overall length / L 3.6614" 93.000 mm Minimum Extension (DIN 6535 HA) 1.6929" - 1.7717" 43.000 - 45.000 mm Product Features:- HAIMER Panther MILL - F3004NN Chamfer- Solid carbide end mill- Shank tolerance h6- Runout < 0.0004" (10 µm)- HAIMER Panther MILL is the absolute all-rounder for side milling and slotting in all steel and stainless materials.- Four cutting edges with unequal pitch and unequal helix provide extremely smooth milling conditions. Thanks to the latest coating technology, the milling cutter adapts perfectly to its environment like a panther, increasing tool life by 30 to 40% compared to conventional coatings. The optimized cutting edge geometry and the adapted helix angle of 36°/38° ensure optimum chip evacuation and therefore perfect surface quality and high process reliability.- Ferocious: Maximum cutting volume in steel and stainless materials- Sharp: Sharp teeth and stable cutting edges for efficient machining- Smooth: Moves elegantly with low vibrations for best surface finishes- Resilient: Modern and resistant coating ensures long tool life and maximum performance- Neck for higher cutting depth- Center cutting- Unequal cutting edge- Optimized forehead design- Minimized wear due to stabilized cutting edges- Eccentric relief grinding- Particularly low-vibration running- For almost all materials- For roughing and finishing- For ramping, drilling and slotting- Cooling with Cool Jet or Cool Flash and using Power Chucks is recommended for higher tool life and high removal rate.- - HAIMER Panther MILL is the absolute all-rounder for side milling and slotting in all steel and stainless materials. Four cutting edges with unequal pitch and unequal helix provide extremely smooth milling conditions. Thanks to the latest coating technology, the milling cutter adapts perfectly to its environment like a panther, increasing tool life by 30 to 40% compared to conventional coatings. The optimized cutting edge geometry and the adapted helix angle of 36°/38° ensure optimum chip evacuation and therefore perfect surface quality and high process reliability. Ferocious: Maximum cutting volume in steel and stainless materials Sharp: Sharp teeth and stable cutting edges for efficient machining Smooth: Moves elegantly with low vibrations for best surface finishes Resilient: Modern and resistant coating ensures long tool life and maximum performance- Corner chamfer 45°- Teeth 4- Helix angle 36,5/38,5°- Steel All types of steel and cast steel, with the exception of steel with an austenitic structure- Stainless steel Stainless austenitic steel and austenitic-ferritic steel and cast steel- Cast iron Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite- High temperature alloys and titanium alloys Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys- NF metals Aluminium and other non-ferrous metals, non ferrous materials- Hard materials Hardened steel, hardened cast iron materials, chilled cast iron- Feed direction (Side milling, Ramping)- Ramping 2-3°- Slotting- Side milling- Emulsion- Cold air- Dry machining- Minimal lubrication Company History:Family-owned since 1977, HAIMER has grown from a precision parts specialist into a global tooling solutions supplier with operations across Europe, North America, and Asia.