BH3D Printing Double Cup Holder l 2nd Gen 89 - 95

Add the Cup Holders Your 4Runner Should Have Come With 3D-printed ABS double cup holder for the 1990–1995 2nd Gen 4Runner — two cup wells, two phone slots, pen holders and a flashlight slot, dropped straight into the factory console. The factory centre console on the 2nd Gen 4Runner is famously useless for anything you actually want to put down. BH3D Printing's double cup holder dives in and turns it into proper modern storage with no cutting or modifying. Two cup wells: a larger one with a removable black insert (3" / 76mm with the insert in, opens up to 3 3/4" / 95mm with it pulled — fits a Nalgene), and a smaller well at 2 3/4" (closer to the driver) that grips cans and water bottles without rattle. Plus two phone slots, two pen wells, and a spot for a small flashlight. Pick your colour + drivetrain combo. The console curvature differs slightly between 2WD, 4WD Auto, and Manual transmission consoles, so the variant has to match — nine combinations total covering Tan / Gray / Black across all three console types. 4Runner-specific: This is designed around the LHD 4Runner console (smaller well sits to the left, closer to a left-side driver). The JDM Hilux Surf of the same era runs a mirror-image RHD console, so this won't fit a Hilux Surf — if you're on a Surf, check the Hilux Surf Double Cup Holder instead. What you're getting: Heavy ABS plastic build — 3D-printed in the USA, factory-matching colour finishes. Two cup wells — sized for cans, bottles, and large drinks (with removable insert). Phone, pen + flashlight slots — proper everyday storage. Drivetrain-specific fit — matches your console curvature. Bolt-in install — 2-4 self-tapping screws + 3M automotive adhesive (number of screws varies by console type). Frequently asked questions Will it fit my truck? Made for the LHD 1990–1995 2nd Gen 4Runner centre console. It will not fit a JDM Hilux Surf (the RHD console is mirror-imaged). For Surfs, see the dedicated Hilux Surf Double Cup Holder. How does it install? 2–4 self-tapping screws (varies by drivetrain variant) plus strips of 3M automotive adhesive that come included. About a 20-minute job. What colours are available? Three factory-match colours — Tan, Gray, and satin Black — across all three drivetrain console types. Nine combinations to pick from. Compatibility✘ 1st Gen Surf / 4Runner 83 - 88 ✔ 2nd Gen 4Runner 90 - 95 (LHD) ✘ 2nd Gen Hilux Surf 90 - 95 (RHD console differs) ✘ 3rd Gen Surf / 4Runner 96 - 02 ✘ 4th Gen Surf / 4Runner 03 - 09Specifications Spec Detail Fitment 2nd Gen 4Runner (1990–1995, LHD only) — not for JDM Hilux Surf Configurations 9 (3 colours × 3 drivetrains) Colours Tan, Gray, satin Black Drivetrain options 2WD Auto, 4WD Auto, 2WD/4WD Manual Material ABS plastic, 3D printed (USA) Install 2–4 self-tapping screws + 3M adhesive (included) Cup well sizes 2 3/4" + 3" (with insert) / 3 3/4" (insert out)