Warning & Safety Lighting XDR-2 Beacon A low-profile 36W LED beacon built for the harshest work environments. 24 high-output LEDs, 12 selectable flash patterns, and full ECE + SAE certification — sealed to IP69K and backed by a lifetime warranty. Lifetime Warranty IP67 / IP69K ECE R65 · SAE J845 12 Flash Patterns 36WLED Output IP69KSealed & Rated 12Flash Patterns 10–30VMulti-Voltage Also available in a heavy-duty XDR-4 version → Overview Built for emergency, utility, and off-road work vehicles, the XDR-2 Beacon packs 24 individual 1.5W LEDs — 36W total — into a rugged, low-profile housing that stands just 2.15 in tall. Twelve selectable flash patterns and both synchronized and asynchronized modes let you run a single beacon or a coordinated array across a whole fleet. A robust aluminium housing and UV-resistant polycarbonate lens shrug off impact, weather, and years of sun. Sealed to IP67 and IP69K, rated to withstand 60G of shock, and operating from -45°C to +65°C, it's certified to ECE R65, ECE R10, SAE J845, CE and CISPR 25. Runs on any 10–30V system and mounts with a simple bolt-down fixing. Choose Your Setup Option 1 · Base Permanent Hard-wired for a clean, permanent installation. Open / bare-wire lead Bolt-on mounting Wires into your own switch & power source Option 2 · Plug & Play Plug & Play Ready to run out of the box — no hard-wiring needed. 9.5 ft of wiring with a 12V cigarette-socket plug Controls built into the back of the plug Rocker 1 — power on / off Rocker 2 — cycle through the 12 flash patterns Details Key Features 36W total output from 24× 1.5W LEDs 12 selectable flash patterns Sync & async multi-beacon operation Low-profile — only 2.15 in tall IP67 & IP69K waterproof sealing 60G anti-shock rating Robust aluminium housing UV-resistant PC lens Amber or Clear lens options 10–30V multi-voltage input -45°C to +65°C operating range Bolt-mount installation What's in the Box Permanent (Base) 1×XDR-2 Low-Profile LED BeaconAmber or Clear lens 1×Bolt-Mount Hardware KitFixed bolt-down mounting 1×Open-Wire Lead (~16 in)Hard-wire into your own switch & power Plug & Play 1×XDR-2 Low-Profile LED BeaconAmber or Clear lens 1×Bolt-Mount Hardware KitFixed bolt-down mounting 1×9.5 ft Plug Harness12V cigarette-socket plug with built-in on/off + pattern-cycle rocker controls Note: on the Permanent version, flash-pattern selection is set through the wiring; on the Plug & Play version it's handled by the rocker switches on the plug. Full Specifications Power 36W LED Chip Light Source 24 × 1.5W LED Voltage 10–30V Flash Patterns 12 Synchronization Sync & Async available Waterproof Rating IP67 / IP69K Anti-Shock Rating 60G Housing Material Robust Aluminium Lens Material UV-Resistant PC Lens Color Amber or Clear Size 4.4 × 4.4 × 2.15 in Mounting Bolt Mount Cable ~16 in lead wire Working Temperature -45°C ~ +65°C (-49°F ~ +149°F) Warranty Lifetime Certifications & Approvals Independently tested and approved to the standards that matter for on-road and fleet use: ECE R65 ECE R10 SAE J845 CE CISPR 25 Applications Emergency Vehicles Tow & Recovery Construction Agriculture & Tractors Utility Fleets Snow Plows Forklifts Security Patrol Warranty Lifetime WarrantyCovers defects in workmanship and materials. Built to Endure60G shock rated, IP69K sealed, -45°C to +65°C.