Peak Suspension 2.5" DSC Coilovers Trek Kit | 2005-2023 Toyota Tacoma

Running stock shocks or basic 2.0" entry-level lifts on a loaded 2nd or 3rd Gen Tacoma leads to rapid heat buildup, shock fade, and bottoming out over washboard gravel and rough Forest Service Roads. The Peak Suspension 2.5" DSC Coilovers Trek Kit upgrades your ride with large 2.5" shock bodies, external reservoirs, and dual-speed compression adjustment. Designed as a direct bolt-on system for 2005–2023 Tacomas, this kit includes tubular upper control arms to correct steering geometry and maintain full articulation on demanding trails. Key Features Dual-Speed Compression (DSC) Adjustability: High-speed and low-speed adjustment dials allow you to tune independently for sharp, square-edged impacts and low-speed chassis roll or braking dive. Thermal Endurance: Substantial 2.5” shock bodies and remote reservoirs hold significantly higher fluid volume, keeping oil temperatures low and damping consistent during extended off-road runs. Corrected Suspension Geometry: Included tubular upper control arms restore essential caster angle after lifting, eliminating high-speed highway wander and ball joint binding at full droop. Thread-Preserving Preload Collar: Uses a pinch-bolt adjuster design that locks your front lift height in place without galling or binding the threads on the aluminum shock body. Platform-Specific Valving: Custom-tuned internal shim stacks built specifically for the leverage ratios and weight characteristics of 2nd and 3rd Gen Tacoma chassis. What’s Included (2) Peak 2.5" Front DSC Remote-Reservoir Coilovers (2) Peak 2.5" Rear DSC Remote-Reservoir Shocks (1) Pair Peak Tubular Upper Control Arms (2) Front Reservoir Mounting Brackets (2) Rear Reservoir Mounting Brackets Complete Mounting Hardware Kit Pro Tip: Lifting a 2nd or 3rd Gen Tacoma 2 to 2.5 inches without replacing the factory upper control arms pulls your alignment out of spec and puts excess strain on the stock ball joints. Installing the tubular UCAs included in this Trek Kit during initial assembly saves labour hours and ensures your tires wear evenly from day one.