DJI AP100 Parachute

DJI AP100 Parachute for Matrice 400 For the Priceless Below DJI AP100 Parachute for Matrice 400 enables C5/UK5 and C6/UK6 operations. It features independent power and full-link redundancy, supporting both manual and automatic deployment. With a response time under 600 ms and a descent rate below 5 m/s [4], it helps protect your platform, payloads, and the ground below. Get a Quote European Standards for Compliant Flights EASA C5/C6 | CAA UK5/UK6 When paired with DJI AP100 Parachute, Matrice 400 meets the European Union Aviation Safety Agency's (EASA) C5/C6 and the UK Civil Aviation Authority's (CAA) UK5/UK6 operational safety requirement. It facilitates compliance for Standard Scenarios, including flights over populated urban areas (STS-01) and Beyond Visual Line of Sight (BVLOS) operations (STS-02). Safety Self-Check, Dual Redundant System Continuous Self-Diagnostics From the moment Matrice 400 powers on and throughout the entire flight, the parachute continuously monitors the status of the gas generator and communication links. If an anomaly occurs, real-time alerts are displayed via the Health Management System (HMS) in the DJI Pilot 2, ensuring safe operation. Independent Power Built-in dual capacitors provide up to 1 hour of independent backup power. This helps ensure uninterrupted flight attitude monitoring and automatic deployment, without relying on main aircraft power or an active E-Port connection. Instant Motor Cut-Off When triggered, an independent Flight Termination System (FTS) cuts motor power within 600 ms, stopping the rotors before parachute ejection to prevent entanglement. Audio and Visual Alarms After deployment, the system continuously emits loud alarms and high-intensity flashing lights for approximately 1 hour. This warns people on the ground to clear the area and helps operators quickly locate and recover the equipment. Fast Deployment, Reduced Impact Automatic Deployment Response Time ≤ 600 ms| Stabilized Descent Speed ≤ 5 m/s at Deployment Altitude ≥ 30 m Automatic Deployment Manual Deployment Automatic Deployment Automatically deploys when it detects flight attitude or speed anomalies. In the EU, UK, and other supported countries or regions, it also triggers when the drone breaches a Geocaging boundary set in the DJI Pilot 2. Manual Deployment Automatically deploys when it detects flight attitude or speed anomalies. In the EU, UK, and other supported countries or regions, it also triggers when the drone breaches a Geocaging boundary set in the DJI Pilot 2. Lightweight, Fits Drone Case LIGHTWEIGHT DESIGN Weighing approx. 935 g, the system preserves Matrice 400's 15.8kg maximum takeoff weight, with a minimal flight time impact of about 6 minutes. EASY STORAGE The DJI Matrice 4 series cameras feature larger apertures and intelligent low-light capabilities, significantly enhancing performance and improving operations during dusk and nighttime. Built for Harsh Environments Sharing Matrice 400's IP55 rating, the system operates reliably in challenging conditions, including heavy dust or rain. It also maintains stable performance across temperatures from -20° to 50° C (-4° to 122° F), delivering consistent results in both hot and cold conditions.