ProMaster 159" HR - Wall Paneling

Complete set of wall paneling for the RAM ProMaster 159" High Roof. Constructed of 1/4" (6mm) Baltic Birch plywood. Includes all hardware needed to install. Remote support for installation provided. Please watch our YouTube video showing installation of this product for more information. Details: Plywood is not finished but we can optionally finish the panels (see below). All plywood is the highest grade (BB/BB) possible but does have an allowable number of patches (usually between 0-6 per side). A higher grade is not commercially available. There is natural grain variation in all plywood products. Standard floor thickness is 1.5" (can accommodate different dimensions with a fee). Precise hole placements utilize stock van locations. Requires installation of approximately 75 Rivnuts for mounting. Must use supplied M8 and M5 bolts to mount into stock hole locations. Expect ~1/16" to 3/32" gaps at paneling edges, necessary for thermal expansion and ideal for upholstering. Does not require modification to the foam blobs at the front of the vehicle. Some small areas of internal wall not covered (will provide info by request). What's Included: Required: Go Code Overland ProMaster trim kit and Rails Set of 11 Wall Panels (with optional cut-outs) Rivnuts and Plusnuts used to mount panels with Map for installation Wide head bolts What's Not Included: Any optional trim products, such as the Go Code Overland Window Trim Rings or Sleeping Bump-Outs for sleeping east-to-west.