Elite Sounds ES1250 10" 1250W RMS D4 Bagger Subwoofer

ELITE SOUNDS MOTORCYCLE SUBWOOFER Elite Sounds ES1250 10" 1250W RMS D4 Bagger Subwoofer The Elite Sounds ES1250-3W-10D4 is a 10-inch, 1250-watt RMS dual 4-ohm subwoofer engineered specifically for high-output fiberglass bagger audio systems. It combines serious power handling with a compact 5-inch mounting depth for custom motorcycle saddlebag installations where space, output and durability all matter. A water-resistant paper cone, carbon-fiber dust cap, 3-inch voice coil and heavy-duty push terminals make the ES1250 a purpose-built option for properly designed ported bagger systems rather than a generic automotive subwoofer adapted to motorcycle use. View Specifications Installation Requirements High-Output Bass for Serious Bagger Builds The ES1250 is optimized for fiberglass bagger audio applications and can be used in properly prepared stock or aftermarket saddlebags. It requires a correctly designed ported enclosure and should be matched with appropriate amplifier power, enclosure volume, port area and system tuning. Start a Build Consultation Call 864-334-6131 Key Specifications Brand Elite Sounds Audio Model ES1250 Manufacturer SKU ES1250-3W-10D4 Speaker Size 10 inches RMS Power Handling 1250 watts RMS Voice Coil Configuration Dual 4 ohm Voice Coil Diameter 3 inches Mounting Depth 5.00 inches Cone Water-resistant paper cone Dust Cap Carbon fiber Terminals Push terminals Enclosure Requirement Ported bag required Application Fiberglass motorcycle bagger audio systems Manufacturer Tuning Range 40-500 Hz Product Weight 22.25 lb Quantity Single subwoofer Built Specifically for Bagger Audio Motorcycle subwoofer installations create a very different set of packaging and acoustic challenges than conventional automotive systems. The Elite Sounds ES1250 is engineered around fiberglass bagger audio applications where usable saddlebag space, enclosure construction, mounting depth and high acoustic output must work together. 1250 Watts RMS High RMS power handling gives properly designed systems the output capability needed to add meaningful low-frequency impact to a high-output motorcycle audio build. 5-Inch Mounting Depth The relatively compact mounting depth makes the ES1250 easier to integrate into purpose-built saddlebag enclosures where available depth is limited. Dual 4-Ohm Voice Coils Dual 4-ohm coils provide useful wiring flexibility when matching one or multiple ES1250 subwoofers with a compatible motorcycle audio amplifier. Water-Resistant Cone and Carbon-Fiber Dust Cap Water-Resistant Paper Cone The cone is designed with water resistance appropriate for the demanding environment encountered in motorcycle bagger audio installations. Carbon-Fiber Dust Cap A carbon-fiber dust cap adds stiffness and gives the ES1250 the distinctive high-performance appearance visible through custom bagger installations. Installation note: Water-resistant does not mean waterproof or submersible. Protect the subwoofer, wiring and enclosure from standing water and uncontrolled moisture intrusion. 3-Inch Voice Coil and Heavy-Duty Terminals 3-Inch Voice Coil The large 3-inch voice coil is designed to support the ES1250's 1250-watt RMS power rating when the subwoofer is installed, powered and tuned correctly. Push-Terminal Connections Heavy-duty push terminals provide secure speaker-wire connections and simplify installation inside custom saddlebag enclosures. Ported Saddlebag Installation Required The Elite Sounds ES1250 is designed for use in a properly engineered ported enclosure. Installing the driver into an unmodified or sealed saddlebag without the correct enclosure design is not the intended application. Stock Bags The driver can be incorporated into properly modified factory-style saddlebags when sufficient mounting space, enclosure volume, reinforcement and porting are provided. Aftermarket Bags Custom and aftermarket fiberglass bags can also be used when the enclosure is built around the subwoofer's physical and acoustic requirements. Ported Design Port area, enclosure volume and tuning must be planned as part of the complete system rather than treating the saddlebag as a simple speaker mounting location. Ported bags are required. Final enclosure volume, port dimensions, reinforcement, amplifier power and DSP settings should be determined for the complete motorcycle audio system before fabrication. Designed for Rider-Bike Bagger Systems The ES1250 is not limited to extreme show or competition builds. Elite Sounds designed this platform for high-output rider-bike applications using properly prepared stock or aftermarket bags. That makes it particularly useful for motorcycles where the goal is substantial low-frequency output without moving into the greater mounting-depth and system demands of a larger extreme-output subwoofer platform. ES450 and ES3000 Design Influence Elite Sounds describes the 1250-watt platform as a hybrid positioned between the company's ES450 and ES3000 designs. The result is a motorcycle-focused 10-inch driver aimed at riders who need considerably more low-frequency capability than a conventional mid-bass woofer while retaining a compact 5-inch mounting depth. Amplifier and Wiring Considerations A 1250-watt RMS subwoofer requires an amplifier and electrical system selected around the actual final impedance and number of subwoofers in the system. Single D4 Subwoofer A single dual 4-ohm driver can be wired according to the amplifier configuration and target impedance supported by the complete system. Multiple Subwoofers Multiple ES1250 drivers create additional wiring possibilities. Final impedance must remain within the amplifier manufacturer's supported operating range. Electrical Support High-power motorcycle subwoofer systems may require upgraded power and ground wiring, charging-system evaluation and battery capacity appropriate for the amplifier load. DSP and System Tuning Proper DSP setup is critical in a motorcycle subwoofer system. Gain structure, crossover frequencies, polarity, equalization, limiting and integration with the rest of the system should be established after the enclosure and amplifier configuration are finalized. Do not tune by amplifier power alone. The subwoofer, enclosure, port, amplifier, electrical system and DSP settings operate as one system and should be designed accordingly. Complete Specifications Manufacturer Elite Sounds Audio Product 10" 1250 Watt Dual 4 Ohm Bagger Subwoofer Model ES1250 SKU ES1250-3W-10D4 Nominal Diameter 10 inches Power Handling 1250 watts RMS Voice Coil Configuration Dual 4 ohm Voice Coil Size 3 inches Mounting Depth 5.00 inches Cone Material Water-resistant paper Dust Cap Carbon fiber Terminal Type Push terminals Recommended Application Fiberglass bagger audio systems Bag Type Properly prepared stock or aftermarket saddlebags Enclosure Requirement Ported Manufacturer Listed Tuning Range 40-500 Hz Product Weight 22.25 lb Quantity 1 subwoofer Fitment and Ordering Notes This is a universal custom-installation motorcycle audio subwoofer. It is not a direct drop-in replacement for every Harley-Davidson saddlebag. Verify at least 5.00 inches of usable mounting depth before fabrication. A properly designed ported enclosure is required. Confirm available enclosure volume and port location before cutting the bags. Reinforce fiberglass or factory-style bags as required by the installation. Verify amplifier impedance compatibility before wiring the dual 4-ohm voice coils. Match amplifier output to the complete subwoofer configuration and electrical system. Protect all speaker wiring from water, abrasion, exhaust heat and suspension movement. Professional enclosure design, installation and DSP tuning are strongly recommended. Elite Sounds ES1250 FAQ How much power does the Elite Sounds ES1250 handle? The 10-inch ES1250-3W-10D4 is rated for 1250 watts RMS. What impedance is this version? This model uses dual 4-ohm voice coils. How deep is the Elite Sounds ES1250? Elite Sounds lists a 5.00-inch mounting depth. Can it be installed in Harley-Davidson saddlebags? It is designed specifically for custom fiberglass bagger audio applications and can be integrated into properly prepared stock or aftermarket bags when the required space, enclosure construction and porting are provided. Does it require a ported bag? Yes. Elite Sounds specifies a ported-bag installation for this subwoofer. Is the cone waterproof? Elite Sounds specifies a water-resistant paper cone. Water-resistant should not be interpreted as waterproof or submersible. What size voice coil does it use? The ES1250 uses a 3-inch voice coil. What is the dust cap made from? The dust cap is carbon fiber. Is this sold individually or as a pair? This listing is for one Elite Sounds ES1250 subwoofer. Can Garage Bagger Stereo help design the complete system? Yes. Garage Bagger Stereo can help plan amplifier power, enclosure requirements, bag fabrication, electrical support and DSP integration for a complete motorcycle subwoofer system. Related Motorcycle Audio Motorcycle Subwoofers Shop Motorcycle Subwoofers Amplifiers and DSP Motorcycle Amplifiers Motorcycle DSP Custom System Planning Custom Motorcycle Audio Builds Motorcycle Audio Installation Build Your Bagger Bass System Correctly High-output motorcycle bass depends on more than installing a large subwoofer. Garage Bagger Stereo can help match the Elite Sounds ES1250 with the proper enclosure, amplifier, electrical support, DSP tuning and complete motorcycle audio system. Start a Build Consultation Call 864-334-6131