Toyota Hilux N90 Smoked LED Tail Lights (2026+) | Plug & Play Pair

Smoked LED Tail Lights · Hilux N90 · 2026+ The N90 has the right stance. Clear and red rear lights belong on a different ute. Complete left and right assemblies — full LED brake, reverse, indicators and parkers (most smoked LED sets skip the parkers, these don't), built-in resistors so nothing hyperflashes on the N90's canbus. Factory plugs, factory mounts, 30 minutes with a 10mm socket. The factory lights are functional but they don't match the build most N90 owners are putting together. Smoked LEDs black out the rear, tie in with grille guards and headlight upgrades, and give the back of the ute the same presence as everything else — without turning the N90 into something it isn't. Direct fit — Toyota Hilux N90 (2026+) Fits every N90 model with a tub — left + right pair included. Not sure about your exact build? Message us and we'll confirm before you order. What Actually Matters Here 1 Full LED, including the parkers Brake, reverse, indicators and parker/running lights all run LED. Most smoked LED sets skip the parkers — these don't, so the whole housing lights up properly when your headlights are on. Instant-on brake response too, faster than a halogen globe warming up. 2 Built-in resistors, wired in properly The N90 is canbus-sensitive — a lot of aftermarket LED sets hyperflash or throw errors on it. These have resistors wired into the harness itself, not clipped on as an afterthought. Plug in and it works exactly as factory, no relay to add. Smoked, factory-shaped lens Waterproof, dust-sealed housing No globes to replace Installation — 30 Minutes 1 Undo two 10mm bolts per side Remove the factory tail lights. 2 Plug the factory connector into the new light Direct fit, no adapters. 3 Bolt in, repeat on the other side Test all functions. Done. 10mm socket, that's it. Step-by-step guide included — message us if you get stuck. Specs & What's Included Mounting Factory points, 2 bolts/side Connector Factory plug, direct fit Functions Brake, reverse, indicator, parker Canbus Built-in resistors, no hyperflash Housing Weatherproof, dust-sealed • Left tail light • Right tail light • Wiring harness • Install guide Common Questions Is it really plug-and-play? Yes — factory mounting points, factory plugs, no wiring changes, no coding. Two 10mm bolts per side. Built-in resistors handle the canbus so indicators work correctly straight out of the box. When will this ship? This is a pre-order — expected dispatch October–December 2026. We'll email you the moment your order ships. What does shipping cost? Free tracked shipping via Australia Post — this qualifies under our standard free-shipping threshold for accessories over $200. Nothing extra to pay at checkout. Will the indicators flash at the right rate? Yes — built-in resistors are pre-wired into the harness. The N90 canbus causes hyperflash with standard LED indicators; these are built to prevent that. No extra parts, nothing to set up. I tow a trailer — will this affect my trailer indicators? No — trailer wiring connects to the factory trailer plug, a separate circuit from the tail light wiring. Will this affect my Toyota warranty? The install is fully reversible — original tail lights unplug and refit exactly as they were. Generally, a manufacturer can't void your whole vehicle warranty over an unrelated aftermarket part, but we're not lawyers and this isn't legal advice — if you're unsure, it's worth a quick check with your dealer. Will they fog up? No — fully sealed housings with UV-stable lenses, designed for Australian conditions. The 12-month warranty covers fogging and LED faults if anything does go wrong. What's the returns policy? 30-Day Store Credit on unused, unopened items. Faulty unit? We cover return shipping and replace or refund under the 12-month warranty. Full policy here. 12-month warranty — we handle it, not a third party 30-Day Store Credit Australian Consumer Law applies 5,500+ rigs upgraded, Aussie-owned Please check your state and local vehicle regulations before fitting, as compliance requirements for lighting vary by region.