24V COB LED Strip Light Cool White 6500K – Dotless Super Bright Self Adhesive LED Tape, 1m–100m

24V Cold White COB LED Strip Light – 6500K Daylight Dotless LED Tape Upgrade your lighting with our professional-grade 24V Cold White 6500K COB LED Strip Light. Designed using high-density chip-on-board LED technology, this flexible LED tape produces a smooth, continuous and virtually dotless line of bright daylight-white light. Unlike conventional LED strip lights where individual LED points can often be seen, COB LED tape creates a much more uniform lighting effect. This makes it ideal for visible installations, aluminium profiles, kitchen cabinets, shelving, display units, offices, workshops, retail environments and commercial lighting projects. The crisp 6500K cold white daylight colour temperature provides excellent visibility and a clean, modern appearance. It is particularly suitable for task lighting and areas where bright, clear illumination is required. Key Features Smooth dotless illumination using COB LED technology 6500K cold white daylight for bright, crisp and clear lighting 24V DC operation for professional LED strip installations 320 LEDs per metre for an even and continuous light output 11W per metre power consumption Strong 3M self-adhesive backing for straightforward installation Flexible LED tape suitable for straight runs and custom layouts IP20 rated for dry indoor environments Suitable for installation inside compatible aluminium LED profiles Available in 1m, 5m, 10m, 20m, 30m, 40m, 50m and 100m lengths Where Can This COB LED Strip Be Used? This 24V indoor COB LED strip is suitable for a wide range of domestic, retail, office and commercial lighting applications, including: Kitchen under-cabinet and worktop lighting Workshop, garage and utility-room lighting Office, desk and task lighting Wardrobe, cupboard and storage lighting Retail shelves, counters and product displays Shop, showroom and stockroom lighting Ceiling coving, pelmets and indirect lighting Staircase, handrail and low-level lighting Mirror, vanity and display lighting Commercial feature-lighting installations Installation Advice Before fitting the LED tape, ensure the mounting surface is clean, dry, smooth and free from dust, grease and moisture. Remove the protective backing and press the tape firmly into position. For the best professional finish, protection and heat management, we recommend installing the strip inside a suitable aluminium LED profile . This product requires a compatible 24V LED driver or power supply. The driver must be correctly rated for the total wattage of the installed tape. As the tape consumes 11W per metre, a 5m run uses approximately 55W and a 10m run uses approximately 110W. We recommend allowing additional driver capacity rather than operating the power supply continuously at its maximum output. Longer LED strip runs may require power to be supplied at more than one point to reduce voltage drop and maintain consistent brightness. Electrical connections should be completed using suitable COB LED strip connectors or correctly soldered cable joints. Always check the tape width, polarity and connector compatibility before installation. Compatible LED Strip Accessories Complete your installation with compatible LED strip products from Manningham Lighting & Electrical: 24V LED Drivers and Power Supplies COB LED Strip Connectors LED Strip Connectors Aluminium LED Profiles and Channels LED Tape and LED Strip Lighting Why Choose Manningham Lighting & Electrical? Established UK lighting and electrical supplier Professional products for trade, commercial and domestic customers Wide range of LED strip lights, drivers, profiles and connectors Suitable solutions for electricians, installers, shopfitters and joiners Bulk LED tape lengths available for larger projects Experienced technical support before and after purchase Browse our complete lighting and electrical range at www.manningham.co.uk . Specification Product Type Single Colour COB LED Strip Tape Light Colour Cold White / Daylight White Colour Temperature 6500K Operating Voltage 24V DC Power Consumption 11W per metre LED Technology High-Density COB – Chip on Board LED Density 320 LEDs per metre Lighting Effect Smooth, continuous and dotless light Adhesive Backing 3M self-adhesive backing IP Rating IP20 – dry indoor use only Available Lengths 1m, 5m, 10m, 20m, 30m, 40m, 50m and 100m Power Supply Required Compatible 24V constant-voltage LED driver Recommended Installation Inside a suitable aluminium LED profile Suitable Environments Kitchens, offices, workshops, shops, showrooms, cabinets, shelving, displays and commercial interiors Typical Applications Under-cabinet lighting, task lighting, retail displays, shelving, coving, worktops and feature lighting FAQs What is COB LED tape? COB stands for chip on board. COB LED tape uses a high density of closely positioned LED chips to produce a smooth and continuous line of light, reducing the visible spotting associated with conventional LED strip lighting. What does 6500K cold white look like? A 6500K colour temperature produces a crisp, cool and bright daylight-white appearance. It is cooler than 4000K neutral white and much cooler than 3000K warm white. Where is 6500K LED strip normally used? Cold white 6500K LED strip is commonly used in kitchens, workshops, garages, offices, utility rooms, shops, stockrooms, display areas and other locations where clear, high-visibility task lighting is required. Is 6500K the same as daylight white? Yes. A 6500K light colour is commonly described as daylight white or cold white because it creates a bright, cooler-looking illumination. Is this LED strip dotless? The high-density COB construction creates a smooth and virtually dotless lighting effect. The final appearance may depend on the installation, viewing distance and the aluminium profile or diffuser being used. Does this tape have a self-adhesive backing? Yes. The tape is supplied with a 3M self-adhesive backing. Apply it to a clean, dry and smooth surface for the strongest adhesion. Can this COB LED tape be fitted inside aluminium profile? Yes. Installing the tape inside aluminium LED profile is recommended for a neat professional finish, additional protection and improved heat dissipation. Do I need a 24V LED driver? Yes. This product operates at 24V DC and must be connected to a compatible 24V constant-voltage LED driver or power supply. It must not be connected directly to a 230V mains supply. How do I calculate the driver size? Multiply the tape length by 11W. For example, 5m uses approximately 55W and 10m uses approximately 110W. Allow additional capacity rather than selecting a driver that will operate continuously at its maximum output. Can this strip be cut to size? COB LED tape should only be cut at the marked cutting points shown on the strip. Cutting anywhere else may damage the circuit. Can I connect separate pieces together? Yes. Separate sections may be joined using compatible COB LED strip connectors or soldered cable connections. Check the tape width and connector compatibility before ordering. Is this LED strip suitable for outdoor use? No. This version is rated IP20 and is intended for dry indoor locations. It should not be exposed to rain, moisture, condensation or wet areas. Can I use one driver for a long run? This depends on the total wattage, cable size, installation layout and driver capacity. Longer runs may require power injection at additional points to minimise voltage drop and maintain consistent brightness. Can it be used for kitchen cabinet lighting? Yes. This strip is suitable for kitchen under-cabinet and worktop lighting where a bright cold white daylight effect is preferred. What lengths are available? Available options include 1m, 5m, 10m, 20m, 30m, 40m, 50m and 100m. Does the listing include a driver, connectors or aluminium profile? Unless specifically stated in the selected option, the listing is for the LED strip tape only. Drivers, connectors, cable and aluminium profiles are available separately. Project Help Unsure which LED strip, driver, connector or aluminium profile you need? Speak to our experienced staff, with over 25 years in the lighting and electrical industry. We can assist with domestic, retail and commercial LED strip-lighting projects, including: Selecting the correct LED strip light Calculating the required 24V driver wattage Planning long LED strip runs and power-injection points Choosing compatible connectors and cable Selecting aluminium profiles and diffusers Planning kitchen, shop, display and feature-lighting installations Bulk quantities and larger commercial projects Adam Direct Tel: +44 7437 862786 Email: Naser@manningham.co.uk Harry Direct Tel: +44 7803 085166 Email: harry@manningham.co.uk Sales Office Tel: +44 1274 493830 Email: Sales@manningham.co.uk To help us recommend the correct products, provide the required tape length, installation location, preferred colour temperature and, where possible, photographs or measurements of your project. Important: Electrical installation work should be completed by a suitably qualified person where required. Always isolate the electrical supply before installation or maintenance.