Make: ESP32 Starter Pack

The ESP32 starter pack is the maker's secret weapon for connected projects. This kit bundles everything you need to dive into IoT, smart home automation, and wireless experimentation. With dual-core processing power, built-in 802.11 b/g/n Wi-Fi + dual-mode Bluetooth/BLE, and a generous array of general-purpose input/output (GPIO) pins supporting capacitive touch, ADCs, DACs, and interfaces like I2C, SPI, and UART. The ESP32 punches well above other similar microcontrollers in its class and price point. This pack includes selection of sensors modules and components to get you started, including environmental sensing with the DHT11 temperature and humidity module, motion detection via the HC-SR501 PIR sensor, as well as obstacle avoidance and distance sensing modules. Add the OLED display for real-time feedback, a relay module for controlling external devices, and a full complement of LEDs, switches, and resistors, and you're ready to prototype anything from weather stations to home automation controllers. The breadboard, jumper cables, and passive/active buzzers round out this assembled collection that eliminates the frustration of hunting down components. Whether you're building your first connected device or your fiftieth, this pack gets you from unboxing to blinking LEDs in minutes. Contents: 1 ESP32 Board - 4MB Flash Memory/WiFi/Bluetooth 1 Mini OLED Display 1 Breadboard, Full Size 1 Obstacle Avoidance Module 1 Photoresistor Module 1 DHT11 Temperature & Humidity Module 1 HC-SR501 PIR Motion Sensor Module 1 HC-SR04 PING Distance Sensor Module 1 Potentiometer, 10k w/Knob 1 Micro-USB Cable 30 Resistor Pack: 220ohm, 1K, 10k 1 Passive Buzzer 1 Active Buzzer 1 Relay Module, 5V 2-Channel 5 Pushbuttons with Colored Caps 10 F-M DuPont Cable2 10 F-F DuPont Cables 10 M-M DuPont Cables 15 LEDs: Red, Green, Yellow 1 LED: RGB, 4-pin Download Starter Manual