BETAFPV Aguila20 Brushless Quadcopter (HD Video)

Aquila20 Brushless Whoop Quadcopter is a 2S brushless whoop available in P1 Air Unit HD VTX or Analog VTX versions. It supports beginner-friendly assisted flight modes and full manual control. Specifications: Versions: Aquila20 P1, Aquila20 Analog VTX VTX (Aquila20 P1): P1 Air Unit HD VTX VTX (Aquila20 Analog VTX): analog VTX VTX Power & Range (Aquila20 P1): 200mW and range above 400m VTX Power & Range (Aquila20 Analog VTX): 350mW and range above 200m Camera (Aquila20 P1): P1 VTX camera (1/2.9" CMOS) Camera (Aquila20 Analog VTX): C04 (1/3" CMOS) Wheelbase: 100mm Flight Controller: Aquila20 V1.0 Frame: Aquila20 Brushless Whoop Frame Motors: 1103|10500KV motors Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft) Battery: Aquila20 Exclusive Battery 2S HV 1100mAh Battery quantity: 2PCS Discharge Rate: 15C Discharge Power: 8.74Wh Rated Voltage: 7.6V Battery Weight: 54.5±1.0g Charger: 2S HV Battery Charger and Voltage Tester with BT3.0 Connector Remote Controller Protocol: ExpressLRS 2.4G V3 Camera Tilt: 10°-30° Flight Modes: N/S/M Mode Flight Time: About 10 mins Takeoff Weight (Aquila20 P1): 127±1.0g Takeoff Weight (Aquila20 Analog VTX): 122±1.0g Compatible goggles: VR04 HD, VR04 Compatible radio transmitter: LiteRadio 4 Firmware compatibility note: BETAFPV devices should be updated to firmware version V2.0.5 or later for third-party ArtLynk protocol equipments compatibility Firmware update note: The air unit needs to be updated via the ground station Firmware version note: firmware V2.0.5 is not compatible with any V1 versions (V1.0.36 / V1.0.44) Package Contents: 1x Aquila20 Brushless Whoop Quadcopter (Analog/P1 Air Unit Version) 1x Aquila20 Exclusive Battery 2S HV 1100mAh 1x 2S HV Battery Charger and Voltage Tester with BT3.0 Connector 4x Gemfan 2218 3-Blade Propellers 1x Prop Removal Tool 1x Cross Screwdriver 1x 4Pin Adapter Cable 1x USB Type-C Adapter Board