LIFT LCS FOLDING GLIDE PROPELLER

Blades 1.25 inches at their widest. Folds flat when the motor cuts. Built for riders who foil off power. The LCS Folding Glide Propeller is built on Lift's 2026 folding propeller redesign, a reshaped collapse and reinforcement at the highest-stress points. On that foundation, the Glide runs its own blade geometry, sized and pitched for efficiency and glide. Blades measure 1.25 inches at the widest section, the narrowest profile in Lift's folding line, with 5.6 inches of pitch on a 6 inch diameter. The profile folds flat against the hub the moment the motor cuts. It ships standard on every 55mm propulsion and runs on any 68mm motor with the LCS Base Plate and LCS Tail Cone installed. Construction is aluminum with stainless steel inserts. FEATURES: • 1.25 Inch Blades, Lower Draw at Cruise. The Glide carries 1.25 inch blades with 5.6 inches of pitch across a 6 inch diameter. The smaller profile draws less from the battery at cruise. • A Reshaped Collapse, Flatter Fold and Cleaner Off Power. When the motor cuts, the blades fold flat against the hub. The 2026 redesign reshaped the folded position for The content of this presentation is proprietary and confidential information of MHL Custom/Lift Foils. It is not intended to be distributed to any third party without the written consent of MHL Custom/Lift Foils. cleaner hydrodynamics, with no twitch as the blades settle and no torque grab when the throttle re-engages mid-ride. • Reinforced Design, Stronger Where Folding Propellers Take Load. The Glide is reinforced at the highest-stress points of the design, machined from aluminum with stainless steel inserts. Lift has refined this part through five generations since 2020, each one built on the engineering decisions of the last. • Native LCS Construction, Tool-Free Installation Across Every Lift eFoil. The Glide mounts through the Lift Connect System, directly onto the shaft of any 55mm propulsion, or onto a 68mm motor with the LCS Base Plate and LCS Tail Cone, both included in the 68mm kit. Swaps are tool-free, so the propeller becomes a configuration choice, matched to the day, the board, and the rider. SPECS Product Material(s) Aluminum w/ stainless steel inserts Blade Pitch 5.6” (142 mm) Blade Diameter 6” (152 mm) Blade Width (widest section) 1.25” (32 mm) Compatibility 55mm Motor (native) 68mm Motor (with kit) Select your Propulsion size: 55mm: Propeller only (the 55mm propulsion has the LCS interface built in) 68mm: Propeller Kit (includes LCS Folding Glide Propeller, LCS Base Plate, and LCS Tail Cone)