XTool MetalFab Laser Welder/Cleaner/Cutter - 800 Watt

- CALL FOR PRICING - In Stock Now XTool MetalFab 800W Laser Welder: weld, cut and clean with one handheld system The xTool MetalFab 800W is a handheld fiber-laser welder built for shops that spend most of their day on sheet metal and light fabrication. The 800W laser delivers strong, clean welds up to 4 mm in stainless and carbon steel, with a heat-affected zone of 0.05 mm or less, so thin parts stay flat and need far less grinding. Change the tip and the same torch cuts steel by hand and strips rust and paint. It is the compact, lower-power model in the MetalFab line: easier to place on a standard 220V shop circuit, and ready to grow into a full cut-and-weld cell with the optional CNC Cutter. Key features 800W fiber laser (1080 nm) with continuous, spot and pulse welding modes Welds up to 3 mm in stainless steel, carbon steel and galvanized sheet; up to 3 mm in aluminum and brass; as thin as 0.2 mm Built-in wire feeding system for 0.8, 1.0, 1.2 and 1.6 mm wire (up to a 5 kg spool) Handheld cutting up to 3 mm in stainless and carbon steel Rust and paint removal with the cleaning nozzle 8-inch touchscreen with 108+ built-in material presets for one-touch setup 550 g torch with a 5-second quick release and a 3.5 m cable Safety built in: touch-to-fire nozzle, dual-trigger buttons, interlock and emergency stop Weld quality tested: SGS-tested to ISO 15614-1 (tensile, dye penetrant and metallographic examination) Built to run: 10,000+ hour laser life and forced-air cooling for work from -10 to 40 °C Best for Sheet-metal and light fabrication shops HVAC, enclosures, signage, railings and gates Auto, motorcycle and exhaust repair Thin stainless and aluminum work where warping and grinding eat time Maker spaces, schools and small production shops Specifications Laser 800W fiber, 1080 ± 10 nm, continuous wave / modulated wave Welding modes Continuous, spot, pulse Weld thickness 0.2 to 4 mm stainless / carbon steel / galvanized; up to 3 mm aluminum and brass Handheld cutting Up to 3 mm stainless / carbon steel Wire feeding Built in; 0.8 / 1.0 / 1.2 / 1.6 mm wire; 2–100 mm/s; spool up to 5 kg Torch 550 g, 5-second quick release, 3.5 m cable Power 220–240V AC, 13.5 A full load, about 3 kW (15 A circuit or higher) Size and weight 632 × 304 × 472 mm ( 24.88 × 11.97 × 18.58 in), 35 kg Cooling Forced air Operating range -10 to 40 °C Laser class Class 4 (professional use) Certifications CE, FCC, FDA; weld quality SGS-tested to ISO 15614-1 What you need to run it A dedicated 220–240V circuit (13.5 A full load; 15 A or higher circuit) Assist gas: argon or nitrogen at 99.99% purity, 15–30 L/min at 0.1–0.2 MPa (argon is required for titanium) OD6+ laser safety goggles for everyone in the work area, a trained operator and a controlled area Ventilation or fume extraction for welding and cleaning Laser safety The MetalFab is a Class 4 laser system for professional use. The beam is invisible infrared, and standard welding helmets do not protect against it. Operators need laser-rated eye protection, training on Class 4 lasers (ANSI Z136.1) and on welding operations (ANSI Z49.1), and a controlled work area. Training is the employer's responsibility, and xTool provides laser safety training videos and documents. Add the CNC Cutter Turn the welder into a cut-and-weld workstation. The MetalFab CNC Cutter is sold separately as an add-on, or as a kit with the welder. It adds a 24 × 24 in (610 × 610 mm) cutting bed, speeds up to 400 mm/s, ±0.1 mm accuracy, dual cameras with smart nesting, and pass-through for longer stock. With the 800W, burr-free CNC cuts reach 8 mm carbon steel and galvanized sheet, 3 mm stainless steel, and 2 mm aluminum and brass. In the box xTool MetalFab 800W laser welder with internal wire feed system Welding, cutting and cleaning nozzles and tips Laser safety goggles and gloves Contents may vary by bundle. The CNC Cutter, MaxClean 45 mm cleaning head, air compressor and dryer, laser welding helmet and wire spools are sold separately. Frequently asked questions Is the 800W enough, or do I need the 1200W? If most of your metal is under 4 mm and your CNC cutting stays under 8 mm carbon steel, the 800W covers it. Step up to the 1200W for 4–5 mm steel, 4 mm aluminum, 10 mm CNC cutting, or when you use filler wire every day. Is a laser weld as strong as TIG or MIG? Within its rated thickness and with the right settings, yes. xTool's welds were SGS-tested to ISO 15614-1. For heavy structural work over 5 mm, TIG or MIG are still the right tools, and many shops run a laser alongside them. What power does it need? 220–240V, about 19 A at full load. It is not a standard 110V machine, so confirm your outlet and breaker before delivery. Do I need a CNC table? No. The welder works on its own for welding, handheld cutting and cleaning. The CNC Cutter is an optional add-on for automated cutting. Sold by Ticon Industries. Specifications are manufacturer-published and may change. Thickness maximums come from xTool laboratory tests; real-world capacity varies with duty cycle and joint type.