Estane® T465A-3

Estane® T465A-3 Estane® T465A-3 is a polyester-type thermoplastic polyurethane (TPU) with a hardness of 71 Shore A. This UV stabilized, plasticizer-free soft TPU combines high elasticity with strong mechanical properties, making it suitable for both injection molding and extrusion applications where flexibility and durability are required. Key Features: Hardness: 71 Shore A UV stabilized TPU Plasticizer-free soft TPU High elongation (850%) Good tensile strength (22 MPa) Strong tear strength (60 kgf/cm) Supplied in pellet form Processing Form: Injection Molding Extrusion Processing Notes: Prior to processing, Estane® T465A-3 should be dried at 70–80°C for 2–4 hours using a desiccant dryer. Recommended dew point should be −40°C with a maximum moisture level of 0.05%. Typical injection molding temperatures range from approximately 180°C to 190°C depending on machine setup and processing conditions.