SINET™ Color LCD

Overview The E-BikeKit SINET™ 3.5″ Color LCD is the current display used with E-BikeKit SINET™ electric bike and trike conversion systems. It provides clear ride information, system status, pedal-assist control, diagnostics, and access to commonly used programming settings. 3.5″ full-color LCD USB charging port Battery level and voltage display Current speed, trip distance, and odometer Pedal-assist level selection Walk-assist mode Error diagnostics Advanced programming menu Compatible with current SINET™ cadence and torque-sensing systems Important Compatibility Notice: This LCD is designed exclusively for current E-BikeKit SINET™ systems. It is not compatible with Legacy E-BikeKit or E-TrikeKit electronics, Rescue Pack systems, previous-generation controllers and wiring, or third-party electrical systems. Description The SINET™ Color LCD is the replacement and service display for current-generation E-BikeKit SINET™ conversion systems. The large 3.5″ color screen provides the rider with important system and ride information while also serving as the primary interface for pedal-assist selection, diagnostics, and system programming. The LCD connects directly to the matching SINET™ wiring system using the current waterproof connector architecture. Because display communication and programming must match the controller and other electrical components, this LCD should only be used with a complete SINET™ electrical system. If you are replacing a display and are unsure whether your existing E-BikeKit system is SINET™ or Legacy, please contact us before ordering. Photos of your current display and electrical connectors are usually enough for us to identify the correct generation. Display Features Display Size: 3.5″ Display Type: Full-color LCD USB Charging Port: Included Battery Information: Battery level and voltage Speed Information: Current speed, maximum speed, and average speed Trip Information: Trip distance and odometer Pedal Assist: Assist-level selection Walk Assist: Included Diagnostics: Error-code display Programming: Access to system settings and configuration menus Programming & Setup Video Watch the video below for an overview of the SINET™ LCD, including initial setup, programming, display operation, and commonly used system settings. Watch the SINET™ LCD Programming Guide on YouTube LCD Quick-Start Guide Download the SINET™ LCD quick-start guide for display operation, initial setup, programming, system settings, and commonly used functions. Download the SINET™ LCD Quick-Start Guide (PDF) SINET™ System Compatibility Compatible With: Current E-BikeKit SINET™ conversion systems SINET™ integrated controllers SINET™ external controllers SINET™ main wiring harnesses SINET™ thumb throttles SINET™ locking e-brake levers SINET™ cadence sensors SINET™ bottom bracket torque sensors Not Compatible With: Previous-generation E-BikeKit LCD displays Legacy E-BikeKit or E-TrikeKit controllers Legacy wiring harnesses and controls Legacy Rescue Pack systems Third-party controllers or wiring systems Matching connectors alone do not confirm compatibility. The LCD, controller, wiring harness, sensors, throttle, and brake inputs must all be part of the SINET™ electrical platform. System Specifications Brand: E-BikeKit Platform: SINET™ Display: 3.5″ full-color LCD USB Charging Port: Included System Voltage: 48V SINET™ systems Controller Compatibility: SINET™ integrated and external controllers Pedal-Assist Compatibility: Cadence sensor or bottom bracket torque sensor Throttle Compatibility: SINET™ thumb throttle Brake-Cutoff Compatibility: SINET™ locking e-brake levers Connection: Matched SINET™ waterproof connector Mounting: Handlebar mounting hardware included What’s Included E-BikeKit SINET™ 3.5″ Color LCD LCD control buttons Handlebar mounting hardware Pre-wired SINET™ connector Installation Notes Confirm your system uses current SINET™ electronics before ordering Connect only to the matching SINET™ main wiring harness Do not connect this LCD to Legacy E-BikeKit or E-TrikeKit controllers or wiring Confirm wheel size, assist behavior, and system settings after installation Use the programming video and Quick-Start Guide above for initial setup Incorrect settings may affect displayed speed, distance, assist behavior, or system operation. Support Not sure whether you have a SINET™ or Legacy E-BikeKit system? Contact us before ordering and we can help identify the correct component. Questions? Call us toll-free at 1-866-882-3245, Monday–Friday, 9am–5pm ET, or email support@ebikekit.com.