Vaporesso XROS 6 Pod Kit

The Vaporesso XROS 6 is the newest device in the XROS family, and it's the most refined MTL pod kit the range has produced. It pairs a big 1800mAh battery with a 30W output ceiling, a 0.88-inch colour TFT screen and 3A fast charging, all in an aluminium body that still slips into a jeans pocket. Two COREX 3.0 pods come in the box, so you can vape mouth-to-lung or restricted direct-to-lung straight away. Key features 1800mAh built-in battery 5–30W output range 0.88-inch TFT colour display 3A fast charging via USB-C Eco, Normal and Power modes Adjustable side airflow slider 60s Smart Prime coil saturation SSS 2.0 leak-resistant construction 2ml top-fill COREX 3.0 pods (UK TPD) Button or inhale activated Battery that keeps up with a full day The 1800mAh cell is large for a pod device this size and comfortably handles a day of moderate use. When it does run down, 3A charging brings it back to roughly half capacity in about ten minutes, with a full charge taking around 45 minutes. The screen shows remaining battery, wattage and puff count, so there's no guesswork. Smoother draw, richer flavour Vaporesso's VENTURI airflow system reshapes the air path to cut down draw noise and resistance, which makes the inhale noticeably quieter and softer than earlier XROS models. Behind it, COREX 3.0 mesh heats more evenly across the coil surface for cleaner flavour and a longer usable pod life. The 60s Smart Prime function saturates a fresh coil in about a minute, so you're not waiting ten minutes after every refill. Which pod should you use? The XROS 6 works with every pod in the XROS COREX replacement pods range, so you can tune the draw to suit you. Resistance Best for Suggested wattage E-liquid 1.2Ω Tight MTL 10W 50/50 or nic salt 1.0Ω Tight MTL 12W 50/50 or nic salt 0.8Ω MTL (included) 16W 50/50 or nic salt 0.6Ω RDL (included) 21W 50/50 or nic salt 0.4Ω Restricted DTL up to 30W High VG Pair the 0.6Ω and 0.8Ω pods with a 50/50 or nic salt e-liquid. Save your high-VG 100ml shortfill for the 0.4Ω pod. Variable wattage adjustment unlocks only with the 0.4Ω pod; the other resistances run on the three preset power modes. Upgrading from the XROS 5? The headline changes are the VENTURI airflow system, COREX 3.0 pods in place of COREX 2.0, SSS 2.0 leak resistance and the 60s priming function. Battery capacity and 30W output stay the same. Your existing XROS pods still fit, so nothing you already own goes to waste. If you're comparing devices across the full Vaporesso range, our guide to Vaporesso XROS devices, pods and coils breaks down how the models differ. How to use it Charge the device with the supplied USB-C cable. Remove the sticker from the base of the pod. Pull off the mouthpiece and fill through the top port. Insert the pod and hold the button for three seconds to run the 60s prime. Click five times to power on. Inhale, or hold the button, to vape. Click twice to open the menu and switch between Eco, Normal and Power. Slide the side airflow control to loosen or tighten the draw. What's in the box 1 x Vaporesso XROS 6 device 1 x XROS COREX 3.0 0.6Ω 2ml pod (pre-installed) 1 x XROS COREX 3.0 0.8Ω 2ml pod 1 x USB Type-C cable 1 x User manual and warranty card Frequently asked questions What e-liquid works best in the XROS 6? Use 50/50 or nic salt e-liquid with the 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω pods. Save high-VG liquid for the 0.4Ω pod. How often do the pods need replacing? Around a week of regular use. Swap the pod when flavour drops off or vapour thins out. Is the XROS 6 a good replacement for a disposable? Yes — it's one of the simplest refillable devices to live with day to day. See our roundup of the best refillable pod kits in the UK for how it compares to the alternatives. Does it leak? SSS 2.0 adds double sealing and a larger reservoir to reduce leaking. Avoid overfilling — that's the usual cause with any top-fill pod. Specifications Battery 1800mAh, built-in Output 5–30W Charging USB-C, 3A Display 0.88" TFT Pod capacity 2ml (TPD) Dimensions 122 x 24.5 x 14.5mm Weight 65g Included resistances 0.6Ω, 0.8Ω