Edgi Custom Works - 430mm VSR Unbridged Inner Barrel - VSR-10

Edgi Custom Works 430mm unbridged VSR inner barrel, sized for the Tokyo Marui VSR-10 and its clones. On a spring sniper the barrel has a single stroke of air behind each BB, so a consistent, well-finished bore is what keeps shots grouping. Every barrel is hand-lapped and finished by Edgi so the bore stays consistent over its full length. Choose on this page: material (brass or steel) and bore (6.01, 6.03, 6.05mm). On bore, the tighter 6.01 grips the BB harder and rewards clean, well-sorted ammunition, while a wider bore is more forgiving of BB size. The steel is the harder-wearing of the two materials and is priced above the brass. Fitment: this barrel has an unbridged VSR window cut (an open hop window with no bridge across it), so it suits VSR-10 pattern rifles and hop units that take an unbridged VSR-cut inner barrel. 430mm matches the full-length VSR-10. Measure the barrel you are replacing before ordering — length is what decides whether it sits correctly against your hop unit. Stock size. Every Edgi part is cut to order, so we keep the sizes that sell most on the shelf ready to ship rather than have you wait for one to be made — this is one of them. If you need a different length, material, bore or window cut, order the made-to-order version and Edgi will make it to your spec.