GT4 Wing 1600mm

*Current Lead times are 5-6 weeks* Installation Instructions GT4 Wing Overview: Introducing our latest 1600mm carbon fiber wing for the Cayman GT4! Now designed to mount directly onto your OEM wing stands or any aftermarket risers designed for the OEM wing. Just like the swan neck 1600mm wing, this wing shares the identical profile but mounted from below. Although it is not as efficient as the swan neck since turbulent flows at high AoA or slip angles can cause premature boundary layer separation, this will still generates 80-90% of the downforce of it's older brother. Since it uses the same mounting mechanism as the OEM wing, this makes it easy to switch back and forth between the OEM wing for going back to the street. Angle of attack is adjustable to 6 different positions. Set it at 2deg/4deg/6deg/8deg/10deg/12deg Updated wing profile. Less camber for more efficiency performance than older versions. Allows for higher AoA before stalling. Wings are a great way to add efficient downforce to any vehicle. Properly designed wings increase the speed of the air underneath and thus create a low pressure region below and a higher pressure region above. This pressure differential creates downforce on the wing's surface and increases ultimate grip levels for your car. The DBJ 1600mm carbon fiber wing was designed with the intention to create high downforce while maintaining great efficiency. At more aggressive angles of attack (AOA), this wing can produce up to 160lbs of downforce at only 80mph while maintaining a great lift to drag ratio. The wing also features 16 degrees of adjustment so you can easily fine tune your aero balance for your particular setup. The height of the wing is also set such that the wing rests just above your view in the rear mirror so you can have 100% unobstructed view of your friends as you pass them. The wing stands mount directly into the factory holes in the trunk so this wing will fit both the 981 and 718 cayman GT4 models. For those wanting to outfit this on a non-GT4 car, you can check out our adapter kit. Also included now is a full carbon fiber gurney flap for higher downforce applications. Construction: The wing is through vacuum infusion process and built in the USA ensuring the best quality of strength and stiffness. The endplates are also constructed from carbon fiber and have built in adjustment for angle. Performance Data: Features: Vacuum infusion carbon fiber 2x2 twill Included carbonfiber gurney flap for high downforce applications Glossy finish with UV protection Set 6 angles for downforce adjustability (2/4/6/8/10/12 degrees angle of attack) CFD tested and road/track proven results 150lbs downforce & 29lbs drag @80mph (10AOA) 340lbs downforce & 68lbs drag @120mph (10AOA) Wing weight: 10 lbs Wing end plates weight: 0.5 lbs each Fits 981 and 718 Cayman GT4 trunk mounts Manufactured in USA