S6X55A#ABA HPE Networking Comware 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch

BRAND NEW WITH FULL HPE WARRANTY!!! Overview S6X55A#ABA HPE Networking Comware 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch is a fully managed Layer 3 enterprise network switch designed for small and midsize business networks and branch-office deployments. It provides 16 Gigabit Ethernet PoE+ ports for connecting and powering network devices, together with four 1G/10G SFP+ ports for high-speed uplinks and stacking. HPE specifies up to 176 Gbps forwarding capacity and 83.3 Mpps throughput for this model. Built for organizations that need centralized network management without moving to a larger chassis platform, the CW 2150 combines Layer 3 routing, QoS, IPv4/IPv6 capabilities, IRF stacking, and a 248W PoE+ budget. Its 1U rack-mountable design fits standard 19-inch equipment racks, making it suitable for access-layer deployments, branch offices, SMB infrastructure, IP phones, wireless access points, surveillance devices, and other PoE-powered endpoints. Key Features – S6X55A#ABA HPE Networking Comware 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch Processor: ARM 1.2 GHz dual-core Memory: 1 GB SDRAM Flash: 512 MB Storage: 512 MB Flash Networking / Ports: 16 × 10/100/1000BASE-T PoE+; 4 × 1G/10G SFP+ PoE Budget: 248 W Switching / Forwarding Capacity: 176 Gbps Throughput: 83.3 Mpps Latency: <5 µs at 1GbE; <3 µs at 10GbE Management: CLI, Web management, SNMP, out-of-band management, HPE Intelligent Management Center Stacking: IRF stacking for up to 9 switches Form Factor: 1U rack-mountable Power: Fixed internal AC power supply Cooling: One fan according to published distributor specifications; fixed-power design. Technical Specifications Processor Type: ARM 1.2 GHz dual-core Chipset / Platform: HPE Networking CW 2150 / Comware Memory Technology: 1 GB SDRAM Flash Memory: 512 MB Packet Buffer: 1.5 MB Storage Interface: Not applicable; fixed 512 MB Flash for switch software/system storage RAID Support: Not applicable Expansion Slots: 4 × 1G/10G SFP+ ports for uplink/stacking connectivity Networking: 16 × 10/100/1000BASE-T PoE+ 4 × 1G/10GBASE-X SFP+ 176 Gbps forwarding capacity 83.3 Mpps throughput 16K MAC address table 1,500 IPv4 routes 512 IPv6 routes 32 VRF instances 32 switched virtual interfaces I/O Ports: 1 × RJ-45 console 1 × USB Type-C console 1 × RJ-45 out-of-band management PoE: IEEE 802.3at PoE+; 248W PoE budget Routing: IPv4/IPv6 Layer 3 routing, including RIP and policy-based routing Management: CLI, Web browser, SNMP 1/2c/3, REST API, HPE Intelligent Management Center Security / Network Controls: ACL, 802.1X, VLAN, RADIUS, HWTACACS, QoS and access-control features Jumbo Frames: Up to 9000 bytes Stacking: IRF technology, up to 9 switches Operating Environment: -5°C to 50°C operating temperature; 5%–95% non-condensing operating humidity. Physical Specifications Form Factor: 1U rack-mountable Weight: 3.6 kg 7.94 lbs Dimensions (W × D × H): 440 × 260 × 44 mm 17.32 × 10.24 × 1.73 inches Rack Compatibility: Standard 19-inch EIA rack or equipment cabinet; rack-mounting hardware included. Ideal For SMB and mid-market network infrastructure Branch-office access-layer deployments Managed Ethernet access networks IP phone deployments requiring PoE+ Wireless access-point connectivity IP surveillance and security-camera networks Network-connected IoT and edge devices Organizations requiring Layer 3 routing at the access layer Deployments requiring 1G/10G uplinks Networks requiring IRF switch stacking and centralized management Warranty & Support Standard Manufacturer Warranty: Limited lifetime warranty is listed for the S6X55A#ABA by enterprise resellers. Support Compatibility: HPE Networking support and service offerings can be used to extend operational support and service coverage according to the applicable HPE service contract. Management Support: HPE Intelligent Management Center, CLI, Web management and SNMP-based management are supported. FAQs – S6X55A#ABA HPE Networking Comware 2150 16p 248W Switch 1. How many PoE+ devices can the S6X55A#ABA support? The switch has 16 × 10/100/1000BASE-T PoE+ ports with a total 248W PoE budget. The number of simultaneously powered devices depends on their individual PoE consumption. 2. Does the S6X55A#ABA support 10GbE uplinks? Yes. It provides four 1G/10G SFP+ ports, which can be used for high-speed uplinks and IRF stacking. 3. Can multiple S6X55A#ABA switches be stacked? Yes. The CW 2150 platform supports IRF stacking with up to 9 switches, allowing multiple units to operate as a coordinated switching infrastructure. 4. Is this switch suitable for a 19-inch server rack? Yes. The S6X55A#ABA is a 1U rack-mountable switch measuring 440 × 260 × 44 mm and is designed for standard 19-inch rack or equipment-cabinet installation. 5. Does the switch provide Layer 3 networking? Yes. It is a managed Layer 3 switch supporting IPv4/IPv6 routing, VLANs, ACLs, VRF, QoS and other enterprise networking functions. 6. What type of management interfaces are available? Management options include CLI, Web management, SNMP, REST API and out-of-band management, with HPE Intelligent Management Center also supported.