STILL SPIRITS VORTEX AIR COOOLED ALEMBIC EQUIPMENT KIT

VORTEX Alembic Equipment Kit Powered by VORTEX, connected by CREATE+ This is a complete Alembic Pot Condenser Set to fit onto a 25 litre boiler. The VORTEX is a groundbreaking air-cooled condenser that allows you to operate anywhere without the constraints of cooling water, without sacrificing time or quality, and saving hundreds of litres of water per run. Complete with the VORTEX Air Cooled Condenser, CREATE+ 2" modular components, and connecting tri-clamps and gaskets, the VORTEX Alembic Equipment Kit allows you to run your alembic setup without any additional cooling water needed. The VORTEX Air Cooled condenser utilises forced air to dissipate heat from vapour and liquid and can be used in place of water-cooled condensers and dephlegmators. A simple turn of a dial controls fan speed and cooling temperatures instantly and puts precision in your hands at every stage. INSTRUCTIONS: Assemble the CREATE+ modular components with the VORTEX Air Cooled Condenser per the instructions. Attach to your copper dome and boiler (sold separately) and connect to power. As vapour or liquid move through the two internal tubes of the condenser, the aluminium fins absorb the heat, which is then dispersed by the three integrated air fans. The speed of the fans can be increased or decreased with the control dial to control the heat dissipation rate, like adjusting the water flow of traditional water-cooled condensers. CAUTION: Metal fins can have sharp edges. Use care when handling, assembling, cleaning, or storing this unit, and avoid running fingers along the fin surface. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. How to integrate into your existing setup Connect the VORTEX to any 2" tri-clamp compatible boiler in four steps 1. Choose Your Still Setup Decide how you're distilling - Reflux or Alembic - and replace your water-cooled condenser or dephlegmator with the VORTEX Air Cooled Condenser. 2. Attach to Your Boiler Connect your reflux column or alembic setup to your lid or alembic dome, and then on to your boiler. 3. Power On Turn on your boiler and heat your wash. Just before you hit your target temperature, turn on the VORTEX - no cooling water, no fiddling with water flow. 4. Distill Run your distillation as normal - the VORTEX handles the cooling and condensing.